The store will not work correctly when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
×
This website uses cookies to enhance your user experience.
Your interactions and personal data may be collected on our website by us and our partners in accordance with our
Privacy Policy .
Allow Cookies
Battery & Charger
Sold Separately
Stampede 4X4 BL-2s
MODEL SPECS
Name:
Stampede 4X4 BL-2s
Type:
Monster Truck
Skill Level:
1
Scale:
1/10
Weight:
5.98 pounds (2.7 kg)
Length:
17.87 inches (454 mm)
Width:
13.10 inches (333 mm)
Front Track:
13.10 inches (333 mm)
Rear Track:
13.10 inches (333 mm)
Height:
8.34 inches (212 mm)
Wheelbase:
11.62 inches (295 mm)
Center Ground Clearance:
2.44 inches (62 mm)
Driveline:
Shaft-driven 4WD
Differential Type:
Hardened steel bevel, sealed, limited slip
Gear Ratio (Internal):
15.36:1
Gear Pitch:
32 pitch
Steering Servo:
2075 digital high-torque waterproof
Radio System:
2.4 GHz 2-channel radio
Battery Compartment Specs:
162 mm X 50 mm X 26 mm
MOTOR SPECS
Name:
BL-2s 3300 Kv
Motor Type:
Sensorless brushless
Weight:
7.51 ounces (213 g)
Length:
3.15 inches (80 mm)
Diameter:
1.42 inches (36 mm)
Shaft Size:
3 mm
Connector Type:
Traxxas Quick Connect Motor Plug
ESC SPECS
Name:
BL-2s Electronic Speed Control
ESC Type:
Brushless
Case Size:
1.53″ (39 mm) x 2.31″ (59 mm) x 1.21″ (31 mm)
Weight:
3.07 ounces (87 g)
Motor Connectors:
Traxxas Quick Connect Motor Plug
Battery Connectors:
Traxxas High-Current Connector
Clipless Body
Tough reinforced bumpers
Reinforced inner cage
Rugged roof rollover protector
Tailgate protector
Quick and easy removal
Holds tight for intense action
Extreme Heavy Duty Upgrade Kit Installed
Strengthened C-hubs, axle carriers, and steering blocks
Extreme heavy duty driveshafts
Oversize diameter
6 mm axles
Steel wheel hexes
TQ™ 2.4 GHz Transmitter
Full-size 2-channel transmitter
All-day comfort with precise long-range control
BL-2s™ Waterproof Electronic Speed Control
Heat sink accepts accessory cooling fan
Three Programmable Drive Profiles
Sport Mode - Forward / Brake / Reverse
Race Mode - Forward / Brake
Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
Traxxas EZ-Set® one-button setup
Built-in two-stage low-voltage detection for LiPo batteries
NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
LiPo battery packs: 2 cells (7.4 volts)
BL-2s Brushless Motor
Integrated cooling fan
Low-maintenance design
Efficient ball bearings
3300 Kv
Steering
Chassis-mounted 2075 servo
Dual bellcrank design with integrated servo saver
Chassis
Modular composite tub design
Secure battery hold-down latch
High-angle bumpers
Suspension
Heavy duty suspension arms
Oil-filled Ultra Shocks™
White powder-coated springs
Driveline
Full-time shaft-driven 4-wheel drive
Oil-filled steel gear front and rear differentials
Large 32-pitch steel spur gear
Wheels and Tires
Large 2.8” graphite gray wheels
Tall 5.3” Sledgehammer® tires
Rubber-Sealed Ball Bearings
Precision Hex Hardware
MODEL 67076-4 : Stampede® ®
What’s In The Box:
Stampede 4X4 with BL-2s ESC and 3300 Kv motor Quick Start Guide TQ 2.4 GHz radio system High quality maintenance tools
What You’ll Need:
Batteries
Stampede 4X4 requires a single 6-7 cell NiMH or 2-cell LiPo battery.
Charger
The Traxxas EZ-Peak® 2970
AA Alkaline Batteries
Four AA alkaline batteries for the transmitter
BIGGER AND STRONGER THAN EVER!
Stampede® ®
BL-2s Brushless Power System
Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 Kv is long-lasting and requires virtually no maintenance.
Extreme Heavy-Duty Upgrade Kit
Stampede 4X4’s factory-installed Extreme Heavy-Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
Clipless Body Mounting
Stampede 4X4 uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.
New Stampede 4X4
The new Stampede 4X4 features the latest generation 4X4 monster truck chassis design, a clipless body, and Sledgehammer®
Unparalleled Strength
Engineered for maximum strength, the Extreme Heavy-Duty Upgrade Kit fortifies Stampede 4X4 with a full complement of driveline and suspension parts designed to work together as a complete package. Combined with Traxxas’ cold-weather HD suspension arms, Stampede sets a new standard for brushless durability.
Monster Size
Stampede 4X4 rides tall on large 5.3" Sledgehammer®
Reinforced Clipless Body
Stampede 4X4’s new rugged clipless latching system delivers secure mounting and easy one-handed removal. Battery changes are fast and easy with no body clips to lose. The internal body cage with integrated roof skid and tailgate protector strengthen the body for extra-long life.
Waterproof Electronics
Your RC experience should be filled with fun and adventure, not limited by the electronics. Traxxas’ patented waterproof technology gives you the freedom to live out your wildest adventures, regardless of the weather.
BL-2s Brushless Power System
The waterproof BL-2s electronic speed control packs powerful features like three separate drive profiles, low-voltage detection for LiPo batteries, patented Training Mode™, and Thermal-Shutdown Protection to prevent overheating. The sensorless BL-2s 3300 Kv motor with integrated cooling fan delivers strong brushless performance with nearly zero maintenance.
TQ™ 2.4 GHz Radio System
The TQ 2.4 GHz radio system keeps the focus on having fun, not worrying about interference from other vehicles. The TQ radio’s advanced programming provides long-range control with smooth, glitch-free performance and its ergonomic design is comfortable for all-day driving.
Modular Simplicity
Stampede 4X4’s modular chassis design allows the entire front section to be removed with just 5 screws, and the rear assembly with just 4 screws. In less than a minute using a power screwdriver, you have full access for easy service and adjustment.
Details
Sledgehammer Tires and 2.8" Graphite Gray Wheels
Large 5.3" Sledgehammer tires combine excellent ground clearance with true mud-slinging fun. The open-block tread design claws into gravel, dirt, and grass for sure-footed 4X4 traction on nearly any surface. The heavy-duty rubber compound is specially formulated to resist tearing and bonds exceptionally well to the aggressive wheels.
Oil-Filled Ultra Shocks
Stampede 4X4’s oil-filled Ultra Shocks™ utilize dual X-ring technology for a perfect seal and silky-smooth performance. The large oil capacity and rugged design soaks up big jumps and off-road abuse for smooth driving performance. They are easy to tune with a wide range of available oils, springs, and pistons.
Secure Body Latch
Stampede 4X4’s clipless body mounts on specially designed shock towers. The easy-to-use latch unlocks instantly with the quick swipe of a thumb and locks again with a noticeable detent to let you know it’s securely fastened.
Long-Travel Suspension
Stampede 4X4 has huge amounts of seemingly bottomless, ultra-plush suspension travel to swallow up jumps and delivers incredible control. Performance-optimized suspension components provide maximum articulation without binding or interference.
Extended Battery Tray and Hold-Down
Stampede 4X4’s extended chassis accommodates long-format batteries for greater flexibility. A rugged battery hold-down secures the battery safely in the chassis without flimsy straps or clips to lose. They battery latch provides solid locking action to keep batteries safe no matter how wild the action gets.
Traxxas High-Current Connector
The patented High-Current Connectors funnel maximum power to the vehicle’s electronics. High-Current Connectors also provide the quickest, safest charge for Traxxas batteries.
Modular Chassis
Stampede 4X4’s modular design creates a chassis that’s both strong and easy to maintain. The front and rear bulkheads remove easily with just a few screws. In less than a minute using a power screwdriver, you’ll have full access for easy service and adjustment.
Digital High-Torque Waterproof Steering Servo
Stampede 4X4’s extreme speed and tall Sledgehammer tires require a steering servo that’s both strong and durable. The waterproof 2075 digital high servo provides robust steering authority with ball bearings for precise control and quick reflexes.
Waterproof Receiver Box
Stampede 4X4 incorporates a waterproof receiver box in the nose of the chassis to save weight and provide a clean, high-tech appearance. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, Stampede is ready for action!
3-Channel Receiver with Fail-Safe Security
In the event of signal loss due to an accidental transmitter switch-off or depleted batteries, the receiver automatically returns the throttle to neutral and holds the last commanded steering position. The fail-safe programming is conveniently built-in and does not need to be activated.
Dual Bellcrank Steering with Servo Saver
Stampede 4X4’s dual-bellcrank design pivots smoothly even in the harshest conditions. An integrated cam-type servo saver protects the steering servo from crash impacts without sacrificing steering precision.
New Clipless Body
Stampede 4X4’s aggressive monster truck clipless body comes trimmed and pre-painted with the decals already applied. Tough internal reinforcements maintain the body’s integrity while roof skids provide rollover protection to keep the body looking fresh.
Heavy-Duty Suspension Arms
Molded from our toughest composite material, Stampede 4X4’s heavy-duty suspension arms provide just the right amount of flex to resist breaking—even in cold weather! From skate parks to 10-foot ramps, these suspension arms stand up to even the most punishing drivers for non-stop fun behind the wheel.
Hex Hardware
Hex-drive hardware provides a more positive and secure connection than other fasteners. The black-oxide coating provides a rust resistant high-tech look and feel.
Extreme Suspension Components
Stampede 4X4 comes outfitted with the Extreme Heavy-Duty Upgrade Kit already installed for ultimate strength and durability. The axle carriers, caster blocks, and steering blocks are beefed-up with more material and stronger construction.
Reinforced Front and Rear Bumpers
Tough reinforced bumpers protect the chassis against impacts. The specially designed front bumper provides a high approach angle that allows the Stampede 4X4 to climb up and over obstacles with ease.
Large 32-Pitch Gears
Stampede 4X4’s driveline is built to handle standard brushless horsepower power and even the extreme Velineon 3s brushless power upgrade down the road. The spur gear features large 32-pitch teeth for total reliability no matter how much power you pour on.
Upgraded Slipper Clutch
Stampede 4X4’s slipper clutch features larger alloy pressure plates and high-temperature aluminum pads for superior power handling. The slipper clutch delivers equal power distribution front to rear for instant throttle response through the drive system and aggressive four-wheel grip from the Sledgehammer tires.
Maxx-Duty Driveshafts
Stampede 4X4’s Maxx-duty®
Sealed Steel-Gear Differentials
Sealed steel-gear differentials are ready to handle brushless power without costly upgrades. Silicone gaskets and x-ring seals allow the differentials to be tuned for specific running conditions by varying the viscosity of the oil inside them. Stampede 4X4’s modular chassis design makes differential access quick and easy.
