• Easy to follow full-color assembly manual
• True-to-scale part illustrations and ruler charts
• Helpful assembly tips and clear illustrations
• Clear TRX-4^® Sport body
• Body comes pre-cut and ready to mount
• Includes window masking and decals
• Includes Expedition Rack with scale accessories
• Front grille and rear tail gate with lenses for LED lights
• Rugged front and rear bumpers with red D-rings
• (Requires polycarbonate paint)
• Portal Axles
• Increase ground clearance
• Eliminate torque twist
• Steel gears
• Improve axle geometry and reduce strain on driveshafts
• Rigid Steel Frame
• 1.5 mm thick steel frame rails increase torsional rigidity
• Innovative design allows four wheelbase positions (300 mm, 312 mm (standard), 324 mm, 336 mm)
• Adjustable rear shock tower positions
• Bumpers adjust fore and aft
• Rugged rock rails adjust for width
• Wire routing clips integrated into frame rails
• Drivetrain
• Full-time shaft driven 4-wheel drive
• Tough 6 mm stub axles
• Steel front CV driveshafts
• Hardened steel rear axle shafts
• Steel gear transfer case
• Innovative Battery Compartments
• Hinged battery strap allows quick and easy battery access
• No pins to lose
• Accommodates different height batteries
• Accepts full-size long battery packs
• Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
• Transmission
• Single-speed with steel gears
• Twin friction plate slipper clutch
• Easily removed for servicing
• Steering
• Accepts standard size servos
• Superior 45° steering angle
• Direct steering (no servo saver)
• Steering geometry corrected for bump steer
• Suspension
• Front — 3 link with panhard
• Rear — Triangulated 4 link
• Pre-assembled heavy-duty rod ends with steel hollow balls
• 5 mm diameter steel link rods with 4 mm threaded ends
• Pre-assembled aluminum GTS Shocks
• Coilover GTS shocks exclusive to TRX-4 chassis
• Silver-anodized aluminum bodies
• Threaded bodies with collars easily adjust ride height
• Silky smooth damping for the toughest trails
• O-ring cap seal and dual X-ring shaft seals
• Shock oil included in kit
• Wheels and Tires
• 1.9” Canyon Trail tires with trail-tuned foam inserts
• Tough black scale wheels
• Trail tuned S1 rubber compound
• 12 mm steel hex
• Tire glue required
• Patented O-Ring sealed watertight receiver box keeps micro receivers dry
• Sealed Ball Bearings
• Hex hardware with rust-resistant black oxide coating

MODEL 82010-4: TRX-4 Sport Unassembled Kit, pre-cut clear body with Expedition Rack, and full-color step-by-step assembly manual. Requires: electronics, battery, and charger