Ball bearings, blue rubber shield (5x8x2.5mm) (2) |
Pair of 5x8x2.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. |
#5114 | $4.00 |
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) |
Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for smoother, more precise steering and long-lasting performance. |
#5124 | $4.00 |
Body, 1/16 Summit (clear, requires painting)/ grille, lights decal sheet |
From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with decals and pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. |
#7211 | $19.95 |
Body Washers, Foam, 2mm/3mm/4mm |
Adhesive-backed foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure mounting and less rattling. Includes 2 mm (4), 3 mm (4) and 4 mm (4) sizes. |
#6716 | $2.00 |
Wheelie bar, assembled |
The patented Traxxas 1/16 scale adjustable wheelie bar features four position adjustment. The wheelie bar is intended for hard, high-traction surfaces where controlling wheelies can be difficult. The wheelie bar can be removed easily for off-road racing or jumping. |
#7184 | $15.00 |
Differential kit, center (complete for 1/16 E-Revo, 1/16 Slash) |
The optional center differential for Traxxas 1/16-scale vehicles helps balance the power distribution to reduce front end lift on acceleration and improve steering responsiveness. Differential action is fully tunable by changing the silicone fluid. The differential comes pre-loaded with pure silicone oil. Other viscosities sold separately. |
#7014 | $24.95 |
Differential oil kit (1 each: 10K, 30K, 50K weights) |
Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. |
#5136X | $21.00 |
Rebuild kit, center differential (1/16 E-Revo/Slash) (includes o-rings and diff gear covers) |
Refresh your 1/16 scale center differential with this rebuild kit. Includes new O-rings and gear covers. |
#7014X | $3.00 |
Oil, differential (500K wt) (0.7 oz (20cc)) |
Thick 500k weight differential oil adds significant locking action to your differentials. Traxxas performance differential lubes make it easy to increase or decrease the limited slip action of the gear differential. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. |
#5039 | $8.00 |
Oil, differential (100K wt) (0.7 oz (20cc)) |
Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. |
#5130 | $8.00 |
Oil, differential (10K wt) (1.7 oz (50cc)) |
Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. |
#5135 | $7.50 |
Oil, differential (50K wt) (1.7 oz (50cc)) |
Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. |
#5137 | $7.50 |
Driveshafts, center (steel constant-velocity) front (1), rear (1) (fully assembled) |
Steel Constant Velocity Center Driveshafts are designed to handle the extreme horsepower and torque that Traxxas 1/16 VXL models dish out. Solid-steel construction and heavy-duty drive cups offer maximum precision and efficiency with run-after-run durability. O-rings retain the cross pins so you never have to worry about losing a pin, while still allowing easy maintenance. This complete kit includes front and rear driveshafts with instructions for easy installation in Traxxas 1/16-scale vehicles. |
#7250R | $29.95 |
Wheel hubs, hex, aluminum (4) (blue-anodized) |
This set of four 12 mm blue-anodized hex wheel hubs fit with greater precision and look awesome on the axles. The hubs are machined from solid 6061-T6 aluminum for strip-proof performance without excess weight. |
#7154X | $18.00 |
Push rods, aluminum (red-anodized) (4) (assembled with rod ends) |
Reduce flex, increase precision, and add red-anodized style to your 1/16 scale Traxxas truck with this set of four 6061-T6 aluminum push rods. Solid aluminum construction delivers exceptional stiffness without excess weight, and the rod ends are installed for you. |
#7118X | $19.95 |
Aluminum caps, pivot ball (threaded aluminum, hard-anodized, PTFE-coated (8)/ hex wrench, 5mm |
Set of eight aluminum pivot ball caps increase durability and precision for your 1/16 scale vehicle. Hard-anodized and PTFE-coated, these pivot balls reduce friction on the suspension arms for smoother articulation. Special threads on the caps keep them locked in place and they’re easily adjustable with the included 5 mm wrench. |
#7033X | $20.00 |
Hollow balls, steel (machined) (22) |
Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. The steel hollow balls are direct replacements for the standard plastic hollow balls. |
#7028X | $8.00 |
Push rod (molded composite) (green) (4)/ hollow balls (8) |
Set of four 1/16 scale green composite push rods with hollow balls (8) |
#7118G | $6.00 |
Rocker arm set, progressive-2/ 4x7x2.5mm PB (8) |
Progressive rate rocker arms determine how much the compressive force at the wheel will vary with suspension travel. The higher the rate, the more the suspension will stiffen as the wheel moves upward. This will reduce the likelihood of bottoming out when landing from a jump. Progressive rate 2 rocker arms are standard on 1/16 E-Revo, 1/16 E-Revo VXL, and 1/16 Slash. Adding progressive rate 2 rocker arms to 1/16 Summit will lower the ride height and stiffen the suspension. |
#7158 | $5.00 |
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) |
Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking washer keep them snug on the wheel during even the most intense action. |
#1747R | $7.50 |