Titan^® 12-Turn 550 Motor

Stampede's powerful Titan 12T 550 motor is made for rock-crushing torque, lightning-quick acceleration, hardcore wheelies, explosive jumping, and just about any other 4-wheel fun that demands real horsepower. The Titan's oversize armature features 12 turns of pure copper wire for big torque and increased power-handling. The integrated cooling fan pulls cool air through the motor to keep temperatures down for more fun behind the wheel. The Titan 12T requires very little maintenance and provides consistent torque and high speeds run-after-run.

 

 

XL-5^™ Waterproof Electronic Speed Control
The waterproof XL-5 electronic speed control handles the elements while smoothly supplying power to the motor. The XL-5 features three throttle profiles, low voltage detection, Thermal Shutdown Protection, 4-7 cell NiMH and 2-cell LiPo compatibility, and built-in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. The exclusive and patented Training Mode^™ reduces the overall power output of the XL-5 by 50%, making it easier for young or new drivers to develop their control skills before unleashing full-power.

• Innovative watersealed design
• Three drive profiles
  • Sport Mode - forward / brake / reverse
  • Race Mode - forward / brake
  • Training Mode™ - 50% forward / brake / 50% reverse (patented)
• 12-turn motor limit for 550 size motors
• 15-turn motor limit for 540 size motors
• Traxxas EZ-Set^® one-button setup
• LiPo and NiMH compatible with two-stage low-voltage detection
• High-efficiency MOSFET transistors
• Click here for more info.

 

 

 

Battery and Charger Included!
Stampede includes a powerful 8.4 volt 3000 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 4-amp charging is available virtually anywhere thanks to the included 45+ watt USB-C battery charger with iD^® technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.

 

Precision 2.4 GHz Control
Switch on the power and drive! That's all there is to it with the TQ^™ 2.4 GHz radio system. There are no frequencies to manage, so the focus is on having fun. Race multiple vehicles side by side without interference. The TQ's advanced programming provides long-range control with smooth, glitch-free performance. The TQ's ergonomic design is comfortable for all day driving with an internal antenna that is impervious to damage.

 

Waterproof Receiver Box
Stampede's patented sealed receiver box gives you the freedom to drive where you want, when you want. The antenna and servo wires route neatly through a special water-tight seal. A blue O-ring seals the receiver box to protect the receiver from water. The receiver can be removed for service and aftermarket receivers can be installed without losing the sealing properties of the box.

 

3-Channel Micro Receiver with Fail-Safe Security
The TQ 2.4 GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof control and convenience. In the event of signal loss, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The fail safe programming is conveniently built-in and does not need to be set or activated.

 

High-Torque Waterproof Steering Servo
A monster truck needs a powerful steering servo for responsive performance, and Traxxas delivers with the 2056 high-torque servo. This waterproof steering servo uses O-ring seals to keep the fun going when things get wet. Waterproof for all-weather action, the 2056 provides 80 oz-in of steering muscle.

 

Extreme Heavy Duty Suspension Components
Stampede comes outfitted with factory-installed Extreme Heavy Duty suspension components for ultimate strength and durability. The rear axle carriers, C-hubs, and steering blocks are beefed up with more material and stronger construction.

 

Durable One-Piece Camber Links
Durable one-piece camber links are perfect for bashing because they maintain proper suspension geometry and never require adjustments. Captured rod ends provide unmatched durability and they won't pop off.

 

Talon^™ 2.8” Pre-Glued Tires with Foam Inserts
The advanced Talon tire tread pattern provides excellent traction on almost any surface. The soft compound rubber hooks up for maximum acceleration and great grip on dirt, grass, pavement, and rocks.

The mirror-chrome All-Star™ wheels feature a lightweight horizontal bead that holds the tire to the rim even under extreme rpm. Performance-designed foam inserts are standard and all tires come pre-glued from the factory to get you rolling right out of the box.

Included Optional Pinion Gear
Stampede reaches its blistering 30+ mph top speed on-road using the optional 21-tooth pinion gear (included) and the 7-cell 8.4 V battery pack. Out of the box, the installed 16-tooth pinion gear is just right for all-around, wheelie-popping, off-road action.

 

 

Clipless Body Mounting
Stampede’s clipless body holds firm no matter how rough the action gets. Heavy duty latches grip the body tightly, but release in just seconds for fast battery swaps. This convenient hidden latching system replaces traditional body clips with reinforced panels to maintain body integrity and resist pull-through damage.

Clipless Body Latches
Stampede’s innovative clipless body uses secure latches for quick and easy removal. No posts, no clips—just drop the body onto the chassis and snap it into place for a secure hold. When it’s time to change the battery, depress the tabs under the wheel wells and lift to access the chassis in just seconds.

Molded Body Reinforcements
Stampede’s clipless body latches are neatly integrated into molded body reinforcements that look great and protect the body. Unlike traditional posts and clips, Stampede’s body reinforcements spread impact forces over a wide area to minimize the risk of pull-through damage.

Torque-Control Slipper Clutch
The Torque-Control slipper clutch uses special semi-metallic friction pads and finned aluminum alloy pressure plates to dissipate heat and provide consistent traction control. The friction material remains stable across a wide temperature range to provide smooth, linear engagement you can count on, run after run. Spur gears remove and replace easily without altering the slipper adjustment.

Telescoping Driveshafts
Stampede's telescoping slider driveshafts are extremely durable and allow greater articulation for increased suspension travel.

 

Oil-Filled Ultra Shocks
Stampede's oil-filled Ultra Shocks utilize X-ring technology for a perfect seal and silky-smooth performance. They are easy to customize with a wide range of high-performance oils, springs, and pistons available. Features include pressure bladders for air/oil separation and spring clips to change precisely the ride height and spring pre-load tension. If their performance ever fades, refresh them in minutes with our inexpensive rebuild kits.

Powder Coated White Springs
Stampede's springs feature a new spring rate for more responsive handling and the long-lasting white powder coated finish sets it apart from the pack.

Monster 4” Ground Clearance
With 4-inches of center ground clearance, Stampede goes places other trucks can't! Stampede easily tackles real world obstacles such as tall grass, curbs, and rocks.

Motor Mount with Cooling Channels
The sealed gearbox protects the transmission components from dirt and rocks. The molded motor plate includes finned cooling channels where the motor mounts to the motor plate. The cooling channels work in conjunction with the internal Titan 12T motor fan to pull air through the motor for superior cooling.

Brushless Ready Magnum 272^™ Transmission
Stampede's Magnum 272 transmission features metal gears riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears, power transfers quietly to the durable telescoping U-joint driveshafts. The sealed gearbox protects the transmission components from dirt and rocks. Best of all, the Magnum 272 is built Traxxas Tough™ to handle massive brushless power without the need for costly upgrades.

Brushless-Ready Planetary Gear Differential
The planetary gear differential uses hardened steel internal gears for maximum strength during rigorous off-road bashing. This type of differential requires virtually no maintenance and its efficient design puts maximum tire-shredding power to the wheels.

Adjustable Wheelie BarStampede’s patented wheelie bar offers four-position adjustments for complete wheelie control. The durable nylon composite mount offers an extra level of protection for the motor and transmission case.

 

Tube-Style Front Bumper
Stampede’s rugged tube-style front bumper helps ward off crash damage to protect the chassis. The bumper also features bosses to mount accessory LED lights, parts 3690 & 2263 (sold separately).

Hex Hardware
Stampede's hex-drive hardware provides a more positive and secure connection than other fasteners. The black-oxide coating provides a rust resistant high-tech look and feel.

 

Unmatched Customer Support and Parts Availability
Traxxas offers the most extensive product support base in the industry with unrivaled parts availability. Stampede parts and service are available from a network of nearly 2000 hobby dealers worldwide. Nobody works harder than Traxxas to be accessible to you. Our friendly toll-free phone support is available by chat or phone seven days a week from 8:30 am to 9 pm Central Time; just call 1-888-TRAXXAS. We also offer email support anytime at support@Traxxas.com. Traxxas models are about experiencing total performance and satisfaction, not just in the products, but also with the company that stands behind them.

 

MODEL 36254-8: Fully assembled, waterproof, Ready-To-Race^®, with TQ^™ 2.4 GHz radio system,
XL-5^™ electronic speed control, 8.4 V NiMH 3000 mAh Power Cell^™ battery, 4-amp USB-C fast charger, and clipless painted body.

* With 7-cell battery and included optional 21-tooth pinion gear.