Suspension arms, orange, front/rear (left & right), heavy duty (2) |
Heavy-duty suspension arms for Stampede®, Rustler®, and more feature our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for extreme punishment. (These arms fit the rear position of 2WD models or front and rear positions of 4X4 models) |
#3655T | $12.00 |
Suspension arms, red, front/rear (left & right), heavy duty (2) |
Heavy-duty suspension arms for Stampede®, Rustler®, and more feature our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for extreme punishment. (These arms fit the rear position of 2WD models or front and rear positions of 4X4 models) |
#3655L | $12.00 |
Suspension arms, black, front/rear (left & right), heavy duty (2) |
Heavy-duty suspension arms for Stampede®, Rustler®, Slash®, Jato 4X4® and more feature our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for extreme punishment. Sold as a pair. (These arms fit the rear position of 2WD models or front and rear positions of 4X4 models) |
#3655-BLK | $12.00 |
Suspension arms, orange, front/rear (left & right), heavy duty (2) |
Heavy-duty suspension arms for Stampede®, Rustler®, Slash®, Jato 4X4® and more feature our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for extreme punishment. Sold as a pair. (These arms fit the rear position of 2WD models or front and rear positions of 4X4 models) |
#3655-ORNG | $12.00 |
Wires, sway bar (front & rear, hard & soft) (Slash 4X4)/ 3x6 FCS (4) |
Replacement front and rear sway bar wires for the 6898 sway bar kit. Includes hard and soft bars and 3x6 mm mounting screws (4). |
#6896 | $8.00 |
Stub axle, front, steel-splined constant velocity (1) |
Replacement steel front stub axle for Traxxas steel CV driveshafts (6851R). |
#6754 | $7.50 |
Bulkhead tie bars, front & rear, aluminum (red-anodized) |
Set of front and rear bulkhead tie bars with a brilliant red anodized finish |
#6823R | $7.00 |
Bulkhead tie bars, front & rear, aluminum (orange-anodized) |
Set of front and rear bulkhead tie bars with a brilliant orange anodized finish |
#6823-ORNG | $7.00 |
Bulkhead tie bars, front & rear, aluminum (green-anodized) |
Set of front and rear bulkhead tie bars with a brilliant green anodized finish |
#6823G | $7.00 |
Hardware kit, stainless steel, Hoss® 4X4 VXL/Slash® 4X4/Stampede® 4X4/Rustler® 4X4 (contains all stainless steel hardware used on Hoss® 4X4 VXL, Slash® 4X4, Stampede® 4X4, or Rustler® 4X4) |
Give your Traxxas model a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your vehicle with stainless steel hardware for long-lasting performance in wet conditions. Hex-drive heads deliver a positive and secure connection for easy installation and removal. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. (Not all hardware compatible with BL-2s models) |
#6787X | $39.95 |
Hardware kit, Hoss® 4X4 VXL/Slash® 4X4/Stampede® 4X4/Rustler® 4X4 (contains all hardware used on Hoss® 4X4 VXL, Slash® 4X4, Stampede® 4X4, or Rustler® 4X4) |
Give your Traxxas model a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts. (Not all hardware compatible with BL-2s models) |
#6787 | $29.95 |
Body clip (mounting clip), angled, 90-degrees (black) (10) |
90-degree black mounting clips are perfect for battery latches, making battery access quick and easy. Sold as a pack of 10. |
#3935A | $3.00 |
Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) |
Keep your receiver antenna wire safe with this antenna tube and vinyl cap. Includes wire retainer. |
#1726 | $1.00 |
LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits Slash® 4X4) |
Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for Slash 4X4 models, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation. |
#6894 | $49.95 |
LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®) |
Replacement front LED light bar for Slash® and Stampede® LED light kits. Includes 3x8 screws (2), and 2.5x8 screws (2). Requires front bumper 5835X for 2WD Slash, 3635 for 2WD Stampede, 3630 for 2WD Bigfoot® No. 1, 6835X for 4WD Slash, or 6735 for 4WD Stampede. |
#3690 | $22.00 |
LED light harness, rear (requires #5838, 6737X, or 6836 rear bumper) |
Replacement rear LED lights for LED light kits. Fits 5838, 6737X, 6777X, and 6836X rear bumpers. |
#5893 | $8.00 |
Y-harness, BEC to LED light set |
The Y-harness sends power to accessory LED light kits when using the 2260 BEC. |
#2263 | $4.00 |
Servo, digital high-torque 600 brushless, metal gear (ball bearing), waterproof |
The Traxxas Ultra High-Torque 600 servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full steel gears, dual ball bearings, and a full aluminum case for added heat dissipation. A cutting edge brushless motor provides nearly 600 ounce-inches of torque at 6 volts and over 700 at 7.4 volts for extreme applications. The High-Torque 600 servo is fully waterproof, not just “water resistant.” |
#2280 | $159.95 |