Free Battery and Charger with Select BL-2s Models. $60 Value! Learn more >
Traxxas Support is open 7 days a week! Dial 888-TRAXXAS or click Live Chat 8:30am-9:00pm CST. Learn more >
FREE standard shipping on all orders over $99! Discount automatically applied at checkout. Learn more >
Shocks (Ultra Shocks)
| Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) |
| Set of replacement rod ends with 16 long ends and 4 short ends. Includes hollow ball connectors (18) and ball screws (2). |
| #1942 | $7.00 |
| Rod ends, short (6)/ hollow balls (6) |
| Set of six short rod ends with hollow ball connectors |
| #2742X | $4.00 |
| Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2) |
| Change the ride height on your vehicle with these spring pre-load spacers for Traxxas Ultra Shocks. Set includes the following spacers: 1 mm (2), 2 mm (2), 4 mm (2), and 8 mm (2). |
| #3769 | $4.00 |
| Shock shafts, steel, chrome finish (long) (2) |
| Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2). |
| #1664 | $3.00 |
| Shock shafts, steel, chrome finish (xx-long) (2) |
| Replacement XX-long steel shock shafts with chrome finish for Traxxas Ultra Shocks (2). |
| #2656 | $3.00 |
| Attachment screws, shock (3x12mm shoulder screws) (6) |
| Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads. |
| #3642 | $3.00 |
| Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2)) |
| Upper and lower spring retainers for Ultra Shocks with 2-hole pistons (2) and 3-hole pistons (2) |
| #3768 | $3.00 |
| Shock rebuild kit (for 2 shocks) |
| The shock rebuild kit includes the parts needed to rebuild two Ultra Shocks or Big Bore shocks used on Slash®, Rustler®, Stampede® and many other Traxxas models. The package includes silicone O-rings, rubber diaphragms, C-clips and spacers. |
| #2362 | $2.50 |
Slipper Clutch Components
| Differential kit, center (complete) |
| The optional center differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions and maximum corner speed. The sealed differential can be adjusted by using different fluid viscosities for specific driving conditions. The center differential comes fully assembled and ready to install with 50-T, 52-T, and 54-T spur gears. (Center differential kit requires 32-pitch pinion gear.) For off-road use with NiMH and 2-cell LiPo batteries only. For 3-cell LiPo compatibility, Traxxas recommends the 6780 center differential kit. |
| #6814 | $39.95 |
| Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) |
| The heavy-duty clutch rebuild kit refreshes the heavy-duty slipper clutch with new steel disc, aluminum friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. The aluminum friction pads offer greater heat resistance and can be used in place of the composite pads found in the standard-duty clutch. Fits 5351 pressure plate and hub. |
| #5352T | $9.50 |
| Bearing adapter, 6061-T6 aluminum (orange-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) |
| Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the aluminum bearing adapter tolerates a wide heat range to keep you on the throttle longer for more intense action. Includes 10x15x4 mm black-seal bearing. |
| #6893-ORNG | $5.00 |
| Bearing adapter, 6061-T6 aluminum (red-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) |
| Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the aluminum bearing adapter tolerates a wide heat range to keep you on the throttle longer for more intense action. Includes 10x15x4 mm black-seal bearing. |
| #6893-RED | $5.00 |
| Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) |
| Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the aluminum bearing adapter tolerates a wide heat range to keep you on the throttle longer for more intense action. Includes 10x15x4 mm black-seal bearing. |
| #6893G | $5.00 |
| Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft) |
| The center differential gear set includes output gears (2), spider gears (2), and spider gear shaft for the 6814 center differential. |
| #6883 | $15.00 |
| Slipper pressure plate and hub (alloy) |
| Heavy-duty pressure plate and hub for the 5352A or 5352R slipper clutch rebuild kits. Does not fit 5552A standard-duty clutch rebuild kit. |
| #5351 | $8.00 |
| Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) |
| The slipper clutch rebuild kit includes a new steel disc, friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. Fits 5351 pressure plate and hub. |
| #5352X | $7.50 |
Pages
