Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4) |
Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking washer keep them snug on the wheel during even the most intense action. |
#1747T | $7.50 |
Rod ends, Revo® (large) with hollow balls (12) |
Set of twelve large Revo®-style rod ends with hollow balls. |
#5347 | $9.00 |
Rod ends, heavy duty (Jato®/Slayer) (8) |
Set of eight heavy-duty rod ends (Hollow balls sold separately) |
#5525R | $4.00 |
Attachment screws, shock (3x12mm shoulder screws) (6) |
Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads. |
#3642 | $3.00 |
Body clips, heavy duty (12) |
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. |
#3934 | $3.00 |
3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1) |
Upgrade your Phillips-head motor mount screws with these 3x8 mm cap-head machine screws and washers. Includes wrench. |
#1552 | $3.00 |
Antenna caps, vinyl (2)/ antenna spool |
Replacement vinyl antenna caps help protect the vital end of your antenna from rollover damage. The spool can be used to wrap up excess antenna wire length. |
#1926 | $2.00 |
LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Rustler® or Bandit®) |
Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Rustler and Bandit, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation. (Rear bumper not compatible with Magnum 272R transmission.) |
#3794 | $39.95 |
LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires #3735 front bumper for 2WD Rustler® or Bandit®) |
Replacement front LED light bar for 3794 LED light set. Includes 3x8 screws (2) and 2.5 x 8 screws (2). |
#3791 | $22.00 |
LED light harness, rear (requires #2477 wheelie bar mount) |
Replacement rear LED light harness for Traxxas LED light sets. Fits 2477 rear mount. |
#3795 | $6.00 |
Y-harness, BEC to LED light set |
The Y-harness sends power to accessory LED light kits when using the 2260 BEC. |
#2263 | $4.00 |
Velineon® VXL-3s Brushless Power System, waterproof (includes VXL-3s waterproof ESC , Velineon® 3500 motor, and speed control mounting plate (part #3725)) |
The key to the Velineon's brushless power system's extreme power output is total system optimization. The Velineon VXL-3s electronic speed control and 3500 kV brushless motor are carefully engineered to work seamlessly together for maximum power flow. High-frequency transistors and advanced circuit design delivers incredibly smooth and refined throttle control with Traxxas EZ-Set® one-button convenience. |
#3350R | $169.95 |
VXL-3s Waterproof Electronic Speed Control (brushless) (fwd/rev/brake) |
The fully-waterproof Velineon® VXL-3s forward/reverse electronic speed control simplifies brushless technology with three drive modes, low-voltage detection, and EZ-Set® one-button simplicity. |
#3355R | $99.95 |
Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof |
The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications. The High-Torque 400 servo is fully waterproof, not just “water resistant.” |
#2255 | $99.95 |
Motor, Velineon® 3500, brushless (assembled with 12-gauge wire and gold-plated bullet connectors) |
The Velineon® 3500 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor for power and long-life. Since there are no brushes or commutator to wear out, the need for maintenance is virtually eliminated. The Velineon 3500 delivers consistent, high-power output, run after run. |
#3351R | $89.95 |
Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof |
The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications. The High-Torque 330 servo is fully waterproof, not just “water resistant." |
#2250 | $79.95 |
Servo, digital high-torque, metal gear (ball bearing), waterproof |
The high-torque 2270 digital ball bearing servo provides precise control, quick responses, and outstanding torque with a standard-size servo footprint. A fully-waterproof case allows worry-free driving in water, mud, and snow. The 2270 servo offers a significant performance boost over standard 2075-series servos with the outstanding durability of all-metal gears and 236 oz-in of torque with a transit time of 0.175 sec /60°. |
#2270 | $59.95 |
Servo, digital high-speed, metal gear (ball bearing), waterproof |
The digital 2075R High-Speed Metal Gear Servo features a waterproof case for worry-free driving in water, mud, or snow. Ball bearings increase steering precision with the superior durability of all-metal gears for the ultimate driving experience. |
#2075R | $49.95 |
Servo, digital high-torque, metal gear (ball bearing), waterproof |
The digital 2075R High-Torque Metal Gear Servo features a waterproof case for worry-free driving in water, mud, or snow. Ball bearings increase steering precision with the superior durability of all-metal gears for the ultimate driving experience. The servo features 125 oz-in torque and a transit time of 0.17 sec /60°. |
#2075X | $49.95 |