Wheelie Bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4) |
Replacement adjustable arm for Traxxas #3678 and #5472 wheelie bars. Includes 3x12 mm shoulder screws (4). |
#4974 | $10.00 |
Wheelie bar mount (heavy duty) |
Replacement heavy-duty wheelie bar mount for the 9460-series extended wheelie bar |
#9464 | $5.00 |
Wheelie bar mount (1) / hardware (pink) |
Replacement pink wheelie bar mount for the Traxxas 3678P pink wheelie bar |
#3677P | $4.00 |
Wheelie bar mount (1) / hardware (green) |
Replacement green wheelie bar mount for the Traxxas 3678A green wheelie bar |
#3677A | $4.00 |
Wheelie bar mount (1) / hardware (blue) |
Replacement blue wheelie bar mount for the Traxxas 3678X blue wheelie bar |
#3677X | $4.00 |
Wheels (4)/ Axles (2), for Maxx® Wheelie Bar |
Replacement wheelie bar wheels (4) and mounting screws (2) for standard wheelie bar. |
#4976 | $4.00 |
Wheelie bar mount (1)/ hardware (Stampede®, Rustler®, Bandit series) |
Replacement black wheelie bar mount for the Traxxas 3678 black wheelie bar |
#3677 | $4.00 |
Battery hold-down plate (black)/ metal posts (2)/body clips (2) |
Black battery hold-down with metal posts (2) and retaining clips (2). |
#3727 | $3.00 |
Differential, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash®) |
The Traxxas Pro-Built differential comes completely assembled and ready to install inside your Magnum 272™ transmission. Does not fit Magnum 272R transmission |
#2380 | $14.95 |
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) (fits 2WD Rustler®/Stampede®) |
Traxxas steel constant velocity shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look. |
#1951R | $69.95 |
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) |
Traxxas steel constant velocity driveshafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look. |
#6852R | $69.95 |
Stub axle, rear, steel-splined constant velocity (1) |
Replacement 5 mm steel rear stub axle for Traxxas steel CV driveshafts (1951R, 6852R, and 9450R). |
#6753 | $7.50 |
Half shaft, internal splined (steel-spline constant velocity) (1) |
Replacement steel internal-spline half shaft for Traxxas steel CV driveshafts (1951R, 6851R, 6852R, 6451, and 6452). |
#6751 | $6.00 |
Camber link set (plastic/ non-adjustable) (front &rear) |
Replacement non-adjustable camber link set includes front and rear plastic links. |
#6743 | $3.00 |
Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware) |
Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to rebuild two driveshafts. Fits 1951R, 6851R, 6852R, 6451, 6452, and 9450R. |
#6757 | $18.00 |
Carriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) |
Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories. |
#9150-RED | $6.00 |