Keep the Fun Going! Save 20% on aluminum, bodies, and wheels & tires. Use code FUN2025. Click Here >
Traxxas Support is open 7 days a week! Dial 888-TRAXXAS or click Live Chat 8:30am-9:00pm CST. Learn more >
FREE standard shipping on all orders over $99! Discount automatically applied at checkout. Learn more >
Shocks (Ultra Shocks)
| Attachment screws, shock (3x12mm shoulder screws) (6) |
| Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads. |
| #3642 | $3.00 |
| Multi-tool (plastic) |
| The plastic multi-tool can be used to loosen castle nuts as well as upper and lower shock caps. |
| #5475 | $2.50 |
| Shock rebuild kit (for 2 shocks) |
| The shock rebuild kit includes the parts needed to rebuild two Ultra Shocks or Big Bore shocks used on Slash®, Rustler®, Stampede® and many other Traxxas models. The package includes silicone O-rings, rubber diaphragms, C-clips and spacers. |
| #2362 | $2.50 |
Slipper Clutch Components
| Slipper clutch, complete (for Slash 4x4) |
| This slipper clutch comes completely assembled and ready to install into your 1/10 scale 4X4 vehicle. The slipper clutch can be used as a standard replacement for existing clutches, or as an upgrade for vehicles with a high-stall clutch. The slipper clutch comes equipped with a pre-installed 54-tooth 32-pitch spur gear. |
| #6878 | $20.00 |
| Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) |
| The heavy-duty clutch rebuild kit refreshes the heavy-duty slipper clutch with new steel disc, aluminum friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. The aluminum friction pads offer greater heat resistance and can be used in place of the composite pads found in the standard-duty clutch. Fits 5351 pressure plate and hub. |
| #5352T | $9.50 |
| Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft) |
| The center differential gear set includes output gears (2), spider gears (2), and spider gear shaft for the 6814 center differential. |
| #6883 | $15.00 |
| Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1)) |
| The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin, 4 mm locknut and 5 mm locknut. Fits 5556 pressure plate and hub. |
| #5552X | $10.00 |
| Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) |
| The slipper clutch rebuild kit includes a new steel disc, friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. Fits 5351 pressure plate and hub. |
| #5352X | $7.50 |
| Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8 (4) |
| Replacement housing for the 6814 center differential. Includes ring gear gasket, X-ring gaskets (2), bushings, 5x10x.05 mm washers, and 2.5x8 mm screws (4). |
| #6884 | $5.00 |
Spur Gears & Pinion Gears
| Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) |
| The 54-tooth steel spur gear (32-pitch) fits the 6780 center differential. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. |
| #3956X | $15.00 |
| Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
| The heavy-duty 12-tooth (32-pitch) pinion gear is machined from hardened steel for extra-long life. The gear fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. |
| #3942X | $5.95 |
| Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
| The heavy-duty 15-tooth (32-pitch) pinion gear is machined from hardened steel for extra-long life. The gear fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. |
| #3945X | $5.95 |
| Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
| The heavy-duty 17-tooth (32-pitch) pinion gear is machined from hardened steel for extra-long life. The gear fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. |
| #3947X | $5.95 |
| Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
| The heavy-duty 16-tooth (32-pitch) pinion gear is machined from hardened steel for extra-long life. The gear fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. |
| #3946X | $5.95 |
| Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
| The heavy-duty 19-tooth (32-pitch) pinion gear is machined from hardened steel for extra-long life. The gear fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. |
| #3949X | $5.95 |
| Gear, 21-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
| The heavy-duty 21-tooth (32-pitch) pinion gear is machined from hardened steel for extra-long life. The gear fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. |
| #3951X | $5.95 |
| Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
| The heavy-duty 20-tooth (32-pitch) pinion gear is machined from hardened steel for extra-long life. The gear fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. |
| #3950X | $5.95 |
| Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw |
| The heavy-duty 14-tooth (32-pitch) pinion gear is machined from hardened steel for extra-long life. The gear fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. |
| #3944X | $5.95 |
Pages
