Wing, Rustler® 4x4 (white)/ 3x8 FCS (3) |
Add vibrant color to your Rustler 4X4® with this functional rear wing. The wing reduces drag while still providing valuable downforce for high speed stability.The wing mounts directly to the internal body reinforcements for lasting durability. Includes hardware. |
#6721A | $6.00 |
Wing, Rustler® 4x4 (blue)/ 3x8 FCS (3) |
Add vibrant color to your Rustler 4X4® with this functional rear wing. The wing reduces drag while still providing valuable downforce for high speed stability.The wing mounts directly to the internal body reinforcements for lasting durability. Includes hardware. |
#6721X | $6.00 |
Wing, Rustler® 4x4 (orange)/ 3x8 FCS (3) |
Add vibrant color to your Rustler 4X4® with this functional rear wing. The wing reduces drag while still providing valuable downforce for high speed stability.The wing mounts directly to the internal body reinforcements for lasting durability. Includes hardware. |
#6721T | $6.00 |
Skid plate, roof (body) (blue)/ 3x12mm CS (4) |
Add a touch of color to your Rustler® 4X4 with this heavy-duty roof skid plate. Made from our toughest composite material, the roof skid protects your vehicle’s body during rollovers. Includes 3x12 mm screws (4). |
#6728X | $6.00 |
Skid plate, roof (body) (orange)/ 3x12 CS (4) |
Add a touch of color to your Rustler® 4X4 with this heavy-duty roof skid plate. Made from our toughest composite material, the roof skid protects your vehicle’s body during rollovers. Includes 3x12 mm screws (4). |
#6728T | $6.00 |
Body reinforcement set (fits #6717 body) |
The Rustler 4X4 body reinforcement sets provide added protection for your Rustler 4x4 during extreme driving. These high-strength composite reinforcements help spread impact forces through the body, ensuring long-lasting fun through the toughest landings and hardest hits. Includes mounting screws (8). Fits 6717 body. |
#6710 | $5.00 |
Official Team Traxxas® racing decal set(flag logo/ 6-color) |
The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start®, Stinger™ Motors, ProGraphix®, TRX® engines and www.Traxxas.com logos. Perfect for adding that “final touch” to your Traxxas ProGraphix painted body, or your own personal paint designs. |
#9950 | $4.50 |
Decal sheet, racing sponsors |
Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker headers. All the logotypes are faithfully produced and fully licensed. |
#2514 | $3.00 |
Differential kit, center (complete) |
The optional center differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions and maximum corner speed. The sealed differential can be adjusted by using different fluid viscosities for specific driving conditions. The center differential comes fully assembled and ready to install with 50-T, 52-T, and 54-T spur gears. (Center differential kit requires 32-pitch pinion gear.) For off-road use with NiMH and 2-cell LiPo batteries only. For 3-cell LiPo compatibility, Traxxas recommends the 6780 center differential kit. |
#6814 | $39.95 |
Slipper clutch, complete (for Slash 4x4) |
This slipper clutch comes completely assembled and ready to install into your 1/10 scale 4X4 vehicle. The slipper clutch can be used as a standard replacement for existing clutches, or as an upgrade for vehicles with a high-stall clutch. The slipper clutch comes equipped with a pre-installed 54-tooth 32-pitch spur gear. |
#6878 | $20.00 |
Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) |
The heavy-duty clutch rebuild kit refreshes the heavy-duty slipper clutch with new steel disc, aluminum friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. The aluminum friction pads offer greater heat resistance and can be used in place of the composite pads found in the standard-duty clutch. Fits 5351 pressure plate and hub. |
#5352T | $9.50 |
Motor mount, 6061-T6 aluminum (blue-anodized) |
The aluminum motor mount for low-CG 4X4 chassis is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power brushless applications. |
#7460R | $36.95 |
Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft) |
The center differential gear set includes output gears (2), spider gears (2), and spider gear shaft for the 6814 center differential. |
#6883 | $15.00 |
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1)) |
The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin, 4 mm locknut and 5 mm locknut. Fits 5556 pressure plate and hub. |
#5552X | $10.00 |
Slipper pressure plate & hub (aluminum alloy) |
Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552A standard-duty clutch rebuild kit. |
#5556 | $8.00 |
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) |
The slipper clutch rebuild kit includes a new steel disc, friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. Fits 5351 pressure plate and hub. |
#5352X | $7.50 |
Plate, motor, red |
This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. |
#7490R | $7.00 |
Plate, motor, orange |
This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. |
#7490A | $7.00 |
Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8 (4) |
Replacement housing for the 6814 center differential. Includes ring gear gasket, X-ring gaskets (2), bushings, 5x10x.05 mm washers, and 2.5x8 mm screws (4). |
#6884 | $5.00 |
Chassis brace kit, orange (fits Rustler® 4X4 or Slash® 4X4 models equipped with Low-CG chassis) |
The heavy-duty chassis brace reinforces Slash® 4X4 models with the low-CG chassis and all Rustler® 4X4 models. Whether you’re sending it at the skate park, or launching from a ramp the heavy-duty chassis brace increases chassis rigidity and reduces flex for the wildest stunts and off-road adventures. |
#6730A | $24.95 |