Radio System, Batteries & Chargers
| 4200mAh 8.4V 7-cell flat NiMH Battery, Series 4 Power Cell |
| Traxxas 4000-series Power Cell NiMH battery packs provide 25% greater capacity than 3000-series batteries for longer run times and higher sustained voltage under load. Low-resistance cells, flexible, silicone-jacketed 12-gauge wire, heavy-duty welded tabs, and Traxxas' exclusive iD® battery system deliver an easier and more rewarding battery experience for your Traxxas model. |
| #2950X | $54.95 |
| LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries) |
| The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included balance lead adapters. Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. |
| #2968X | $31.95 |
| Charger, D/C, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH) |
| The 4-amp NiMH fast charger uses a 12-volt DC power outlet for universal high-output charging. The charger is optimized for charging 6- or 7-cell (7.2 volt - 8.4 volt) Traxxas iD Power Cell NiMH batteries. Peak-detection circuitry makes sure the battery receives a full charge every time. The status LED flashes green to indicate when charging is in progress, then turns solid green when charging is complete for foolproof charging, peak performance, and maximum runtime. For NiMH batteries only. Do not use with LiPo batteries. |
| #2975 | $24.95 |
| LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries) |
| The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the required Balance Lead Adapter (2938X). Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. |
| #2968 | $24.95 |
| Adapter, Traxxas® iD® LiPo battery (adapts Traxxas® iD® batteries to separate balance ports) |
| Traxxas Balance Lead Adapter enables customers to connect their Traxxas iD batteries to accessory cell voltage checkers without using the EZ-Peak® Live app with EZ-Peak Live chargers. The adapter is compatible with 2s, 3s, and 4s Traxxas iD® LiPo batteries. NOTE: Do not attempt to use the 2938X adapter for charging or any purpose other than adapting Traxxas iD batteries to accessory cell voltage checkers. |
| #2938X | $12.00 |
| Battery charge indicators, green (4), grey (4), blue (4) |
| Traxxas Battery Charge Indicator Plugs make it easy to manage the charge status of your batteries. Use green for fully charged batteries, blue for LiPos that are charged for storage, and grey to indicate discharged batteries. These plugs also help protect the battery plug terminals from accumulating dirt during storage and transport. |
| #2943 | $5.00 |
| Seal kit, expander box (includes o-ring, seals, and silicone grease) |
| Refresh your Telemetry Expander Module with this seal kit. Includes new O-rings, seals, and silicone grease. |
| #6552 | $4.00 |
| Fuse, D/C charger, 5A (2) (for #2974, 2975, 2977) |
| Replacement fuses for Traxxas 12-volt DC chargers. For troubleshooting help, consult this support article. |
| #2978 | $1.50 |
Rear Suspension
| Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation) |
| TUBES aluminum 73 mm (center to center) rear camber links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES come assembled with rod ends and and hollow balls. |
| #3644R | $32.95 |
| Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation) |
| TUBES aluminum 73 mm (center to center) rear camber links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES come assembled with rod ends and and hollow balls. |
| #3644G | $32.95 |
| Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation) |
| TUBES aluminum 73 mm (center to center) rear camber links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES come assembled with rod ends and and hollow balls. |
| #3644X | $32.95 |
| Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit) |
| Made from hardened steel, the Extreme Heavy-Duty Suspension Pin Set upgrades the standard screw pins in the Extreme Heavy Duty Upgrade Kit and locks them in place with locknuts. Upgraded suspension pins are for use with the 9080-series upgrade kit only and will not fit standard suspension parts. |
| #9042X | $15.00 |
| Stub axle, rear, 6mm, extreme heavy duty (for use with #9052R steel CV driveshafts) |
| Upgrade your existing 9052X steel CV driveshafts to work with the Extreme Heavy Duty Upgrade Kit with these 6 mm stub axles. These upgraded axles are designed to fit the oversize bearings used in the 9080-series upgrade kit and will not fit standard axle carriers. |
| #9053 | $12.00 |
| Stub axle, front, 6mm, extreme heavy duty (for use with #9051R steel CV driveshafts) |
| Upgrade your existing 9051X steel CV driveshafts to work with the Extreme Heavy Duty Upgrade Kit with these 6 mm stub axles. These upgraded axles are designed to fit the oversize bearings used in the 9080-series upgrade kit and will not fit standard axle carriers. |
| #9054 | $12.00 |
| Shock tower, rear, extreme heavy duty, red (for use with #9080 upgrade kit) |
| Replacement rear shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts. |
| #9039R | $6.00 |
| Shock tower, rear, extreme heavy duty, orange (for use with #9080 upgrade kit) |
| Replacement rear shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts. |
| #9039T | $6.00 |
| Carriers, stub axle, rear, extreme heavy duty, orange (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) |
| Replacement left and right stub axle carriers for the Extreme Heavy Duty Upgrade Kit with 3x41 mm hinge pins (2) and 3x20 mm screws (2). Axle carriers are for use with the 9080-series upgrade kit only and will not fit standard suspension parts. |
| #9050T | $6.00 |
| Shock tower, rear, extreme heavy duty, blue (for use with #9080 upgrade kit) |
| Replacement rear shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts. |
| #9039X | $6.00 |
| Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) |
| Replacement left and right stub axle carriers for the Extreme Heavy Duty Upgrade Kit with 3x41 mm hinge pins (2) and 3x20 mm screws (2). Axle carriers are for use with the 9080-series upgrade kit only and will not fit standard suspension parts. |
| #9050X | $6.00 |
| Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) |
| Replacement left and right stub axle carriers for the Extreme Heavy Duty Upgrade Kit with 3x41 mm hinge pins (2) and 3x20 mm screws (2). Axle carriers are for use with the 9080-series upgrade kit only and will not fit standard suspension parts. |
| #9050 | $6.00 |
Pages
Red
$499.95
Blue
$499.95
Fox
$499.95
Black
$499.95
$499.95
Model# 101076-4
