Carrier, differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 MW |
The aluminum differential housing provides maximum strength for intense action with your E-Revo® VXL Brushless. Standard on the center differential, the aluminum housing may be used to upgrade both the front and rear differentials. Includes X-rings (2), ring gear gasket, metal spacers (4), and 12.2x18x.5 mm washer. |
#8681X | $19.95 |
Oil, differential (100K wt) (0.7 oz (20cc)) |
Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. |
#5130 | $8.00 |
Oil, differential (10K wt) (1.7 oz (50cc)) |
Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. |
#5135 | $7.50 |
Oil, differential (30K wt) (1.7 oz (50cc)) |
Traxxas performance diff lubes make it easy to increase or decrease the limited slip action of the gear differential. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. Each diff lube weight can be purchased separately as well. |
#5136 | $7.50 |
Driveshafts, center E-Revo (steel constant-velocity) front (1)/ rear (1) (assembled with inner and outer dust boots, for E-Revo) |
Steel constant velocity driveshafts are designed to handle the extreme horsepower and torque that the E-Revo® VXL Brushess dishes out. The inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. The nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents not only look good, they are designed to exacting specifications for ultimate strength and performance. Includes screw pins (4). |
#8655R | $59.95 |
Drive cup, steel, extreme heavy duty (2)/ 4x17mm screw pins, heavy duty (2) (machined, heat treated) |
Give your E-Revo® the toughest driveline possible with these extreme heavy-duty drive cups. The drive cups are machined out of high-grade heat-treated steel to resist rounding out from dogbone contact. Includes heavy-duty 4x17 mm screw pins (2). |
#8652X | $24.95 |
Wheel hubs, splined, 17mm (green-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) |
Set of four 17 mm green-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx® and Maxx Slash® models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity driveshafts for compatibility. |
#8654G | $19.95 |
Wheel hubs, splined, 17mm (orange-anodized) (4)/ 4x5mm GS (4)/ 3x14mm pin (4) |
Set of four 17 mm orange-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx® and Maxx Slash® models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity driveshafts for compatibility. |
#8654A | $19.95 |
Wheel hubs, splined, 17mm (blue-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) |
Set of four 17 mm blue-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx® and Maxx Slash® models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity driveshafts for compatibility. |
#8654 | $19.95 |
Wheel hubs, splined, 17mm (red-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) |
Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx® and Maxx Slash® models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity driveshafts for compatibility. |
#8654R | $19.95 |
Wheel nuts, splined, 17mm, serrated (gray-anodized) (4) |
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability. |
#7758-GRAY | $12.00 |
Wheel nuts, splined, 17mm, serrated (green-anodized) (4) |
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability. |
#7758G | $12.00 |
Wheel nuts, splined, 17mm, serrated (red-anodized) (4) |
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability. |
#7758R | $12.00 |
Wheel nuts, splined, 17mm, serrated (black-anodized) (4) |
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability. |
#7758A | $12.00 |
Wheel nuts, splined, 17mm, serrated (orange-anodized) (4) |
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability. |
#7758T | $12.00 |
Wheel nuts, splined, 17mm, serrated (blue-anodized) (4) |
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability. |
#7758 | $12.00 |
Toe links, E-Revo VXL (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (8)/ aluminum wrench, 8mm (1) |
TUBES 144 mm (center to center) aluminum toe links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included 10 mm aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES are sold in pairs and come with rod ends and hollow balls. |
#8638G | $45.95 |
Toe links, E-Revo VXL (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (8)/ aluminum wrench, 8mm (1) |
TUBES 144 mm (center to center) aluminum toe links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included 10 mm aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES are sold in pairs and come with rod ends and hollow balls. |
#8638R | $45.95 |
Toe links, E-Revo VXL (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (8)/ aluminum wrench, 8mm (1) |
TUBES 144 mm (center to center) aluminum toe links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included 10 mm aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES are sold in pairs and come with rod ends and hollow balls. |
#8638X | $45.95 |
Push rods, aluminum (green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts) |
Heavy-duty aluminum push rods provide for maximum strength and anodized style with a brilliant finish. Push rods come assembled with rod ends. Sold as a pair. |
#8619G | $24.00 |