Chassis, low CG (grey) |
Change up the color on your low-CG-equipped 2WD Slash with this black chassis. Low-CG chassis do not fit standard 2WD Slash models without modifications. For a full list of required parts, see the 5830 Slash Low-CG conversion kit. |
#5832G | $19.00 |
Wheelie Bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4) |
Replacement adjustable arm for Traxxas #3678 and #5472 wheelie bars. Includes 3x12 mm shoulder screws (4). |
#4974 | $10.00 |
Tires, rubber (2) (fits Traxxas® wheelie bar wheels) |
Rubber wheelie bar tires look great and provide better grip than standard hard plastic wheels. |
#5185 | $7.00 |
Lower chassis, low CG (blue) |
Change up the color on your low-CG-equipped 2WD Slash with this blue lower chassis. Does not fit standard chassis. |
#5831A | $6.00 |
Lower chassis, low CG (grey) |
Change up the color on your low-CG-equipped 2WD Slash with this gray lower chassis. Does not fit standard chassis. |
#5831G | $6.00 |
Lower chassis, low CG (black) |
Change up the color on your low-CG-equipped 2WD Slash with this accessory lower chassis. Does not fit standard chassis. |
#5831 | $6.00 |
Wheelie bar mount (heavy duty) |
Replacement heavy-duty wheelie bar mount for the 9460-series extended wheelie bar |
#9464 | $5.00 |
Wheelie bar mount (1) / hardware (green) |
Replacement green wheelie bar mount for the Traxxas 3678A green wheelie bar |
#3677A | $4.00 |
Wheelie bar mount (1) / hardware (pink) |
Replacement pink wheelie bar mount for the Traxxas 3678P pink wheelie bar |
#3677P | $4.00 |
Antenna crimp nut, aluminum (red-anodized)/ antenna nut tool |
This red-anodized aluminum crimp nut secures your antenna tube to the chassis. Includes nut wrench. |
#5526R | $4.00 |
Wheelie bar mount (1) / hardware (blue) |
Replacement blue wheelie bar mount for the Traxxas 3678X blue wheelie bar |
#3677X | $4.00 |
Nerf bars, low CG (black) |
Change up the color on your low-CG-equipped 2WD Slash with these black nerf bars. Does not fit standard chassis. |
#5833 | $4.00 |
Wheels (4)/ Axles (2), for Maxx® Wheelie Bar |
Replacement wheelie bar wheels (4) and mounting screws (2) for standard wheelie bar. |
#4976 | $4.00 |
Nerf bars, low CG (blue) |
Change up the color on your low-CG-equipped 2WD Slash with these blue nerf bars. Does not fit standard chassis. |
#5833A | $4.00 |
Nerf bars, low CG (grey) |
Change up the color on your low-CG-equipped 2WD Slash with these gray nerf bars. Does not fit standard chassis. |
#5833G | $4.00 |
Differential, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash®) |
The Traxxas Pro-Built differential comes completely assembled and ready to install inside your Magnum 272™ transmission. Does not fit Magnum 272R transmission |
#2380 | $14.95 |
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) |
Extreme heavy-duty rear steel CV (constant velocity) driveshafts are engineered to satisfy the performance and durability needs of the most demanding drivers. Designed specifically for monster truck applications, these shafts are built to withstand the brutal torque from the 540XL motor and the massive grip of the huge Sledgehammer® tires. The unique splined telescoping design delivers full-range articulation, so there is never a need to limit suspension travel. They are made by Traxxas, for Traxxas so you can always count on easy installation and the perfect fit. |
#9052X | $79.95 |
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) |
Traxxas steel constant velocity driveshafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look. |
#6852R | $69.95 |
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4) |
Traxxas aluminum stub axle carriers improve the appearance and ruggedness of your Traxxas model. The machined billet 6061-T6 aluminum construction adds superior strength with a brilliant anodized finish. The included 5x11 mm rubber-sealed ball bearings provide smooth performance, reduced friction, and long life. |
#3652T | $29.95 |