The store will not work correctly when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
×
This website uses cookies to enhance your user experience.
Your interactions and personal data may be collected on our website by us and our partners in accordance with our
Privacy Policy .
Allow Cookies
Battery & Charger
Sold Separately
Funco Pro Scale Replica
MODEL SPECS
Name:
Funco® ®
Speed:
55+ mph with dual 4s LiPo batteries and speed gearing
Scale:
X-Series™
Length:
32 inches (812 mm)
Width:
21.7 inches (551 mm)
Ground Clearance:
1.98 inches (50 mm)
Weight:
22.06 pounds (10 kg)
Height:
11.1 inches (283 mm) (body), 19.6 inches (498 mm) (whip lights)
Wheelbase:
21.4 inches (543 mm)
Shock Length:
5.08 inches (129 mm) (front), 7.13 inches (181 mm) (rear)
Tires (Arrow Pattern, Front):
6.8″ x 2.3″ (173 mm x 58 mm)
Tires (Paddle, Rear):
7.5″ x 4.0″ (191 mm x 102 mm)
Wheels (Front):
3.2″ (82 mm, inner) x 4.9″ (125 mm, outer)
Wheels (Rear):
3.6″ (91 mm, inner) x 4.7″ (120 mm, outer)
Speed Control:
Velineon VXL-8s
Motor:
Velineon 1200XL Brushless
Overall Drive Ratio:
16.4:1 (21/50 motor pinion and spur gear)
Differential Type:
Sealed, four-gear, limited-slip
Gear Pitch:
Module 1.5 (transmission), Module 1.0 (pinion & spur)
Chassis Structure/Material:
Reinforced Nylon Tub
Brake Type:
Electronic (rear), Dual vented discs (front)
Driveline:
Direct-drive, RWD
Steering:
Bellcrank
Radio System:
TQi 2.4 GHz Transmitter with TSM receiver
Steering Servo:
2085XL metal gear (450 oz-in.)
Skill Level:
5
Battery Tray:
186 mm x 51 mm x 44 mm
Required Batteries:
4 “AA” (transmitter) and 4-cell LiPo battery (x2)
MOTOR SPECS
Name:
Velineon®
Type:
1275 Kv sensorless brushless
Weight:
23.44 ounces (665 g)
Length:
4.32 inches (110 mm)
Diameter:
1.88 inches (48 mm)
Shaft Size:
5 mm
Connector Type:
6.5 mm bullet connectors
ESC SPECS
Name:
Velineon® VXL-8s
ESC Type:
Brushless
Case Size:
2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm)
Weight:
7.60 ounces (215.5 g)
Motor Connectors:
6.5 mm bullet connectors
Battery Connectors:
Traxxas High-Current Connectors
Power Wire:
10 gauge Maxx® Cable
Funco Pro Scale Replica Clipless Body Full-length tube frame support Detailed interior with driver figures Replica engine with licensed accessories 10″ color-matched whip lights Spring loaded-Flex Tech mounts for rollover protection High-performance rear wing Wheelie bar VXL-8s™ Waterproof Electronic Speed Control Aggressive tuning for more power at any rpm Integrated cooling fan Real-time telemetry via Traxxas Link Machined heat sink 10-gauge silicone wire Integrated protection circuits LED status lights Velineon® “Big Block” brushless motor 4-pole 1275 Kv 5 mm output shaft Oversize aluminum heatsink for improved cooling Dual cooling fans 55+ mph with Two 4s LiPo Batteries and Included Speed Gearing Traxxas Stability Management Improves straight line acceleration and braking on low-traction surfaces Never dulls throttle or slows the truck Adjusts from off to 100% assistance from the transmitter TQi™ 2.4 GHz 2-Channel High Output Radio System Automatically stores and loads settings for up to 30 Traxxas Link-enabled models Programmable multi-function knob 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports Patented waterproof receiver box with easy-access plug Ultra-Heavy-Duty 8s Driveline Steel CV driveshafts & axles New larger X-Series™ differential output yokes Fully machined aluminum stub axles Direct-Drive Transmission 1.5 mod wide-face steel gears 1.0 mod steel pinion and spur gears Fixed gear mesh system Rear Differential Huge 1.5 module straight-cut ring gear Sealed 4-gear design Splined outdrives attached with external thru-bolt method Reinforced bulkhead and covers for increased bearing support Rock-Solid Motor Mounting System Precise preset gear mesh adjustments 4 keyed pins lock the motor in place Motor retention separate from gear mesh GT Maxx® Machined aluminum threaded body Extra-large bore and capacity Height-adjustable spring retainer Heavy-duty composite shock caps with pivot balls Lower spring perches bolted on Suspension Polished alumunum-finish suspension arms Made from cold-weather HD composite Performance-optimized geometry Double-shear connections High-strength steel suspension pins with retainers 4 mm machined pivot balls Fixed high-strength camber and toe links Heavy-duty steering blocks and axle carriers Oversized wheel bearings Braking Electronic rear brakes Powerful front disc brakes with spring-loaded calipers Operated by 2075 digital servo Sheathed brake cables Stainless steel slotted and drilled brake rotors Low-CG Chassis Design Modular chassis with interlocking bulkheads Low center of gravity for improved handling Flat bottom design Interlocking skid plates High-strength buttressing on shock towers Dual snap-lock battery compartments Protects batteries from side impacts Allows secondary battery-clip security Interlocking components for tight tolerances Wire management for clean appearance Wheels and Tires 7.5" Rear paddle tires Aggressive paddle design Belted carcass resists ballooning 6.8" front arrow-pattern tires Excellent traction on sand, dirt, and pavement Replica Funco beadlock wheel design Color-matched beadlock rings and axle nuts High-strength glue and bead design Huge 24 mm splined wheel hubs Steering Powerful 450 oz-in steering servo (2085XL) Heavy-duty cam-style servo saver Dirt evacuation channels Fully waterproof Sealed Ball Bearings Hex hardware with Rust-Resistant Black Oxide Coating
MODEL 109076-4 : Funco® ® ®
What’s In The Box:
Funco Pro Scale Replica with Traxxas Big Block™ brushless motor VXL-8s waterproof electronic speed control with integrated telemetry TQi 2.4 GHz radio system High visibility whip lights Wheelie bar Speed gearing High quality maintenance tools
What You’ll Need:
LiPo Batteries
Traxxas recommends dual 4-Cell, 6700 mAh Power Cell LiPo batteries 2890X 2997
LiPo Balance Charger with iD® Traxxas EZ-Peak® 2973
AA Alkaline Batteries
Four AA alkaline batteries for the transmitter.
King Of The Dunes
Driving a Funco sand car is an adrenaline-fueled thrill ride like nothing else on Earth. Outfitted with 1000+ horsepower engines and trick long-travel suspension systems, a Funco sand car can top 150 mph and wheelie with just a blip of the throttle. The Traxxas Funco Pro Scale®
X-Truck Size
Both longer and wider than the legendary X-Maxx®
Scale Details
Traxxas pulled out all the stops to replicate the full-size Funco GTU Sand Car in exact detail. The Funco Pro Scale Replica features a full interior with dashboard and driver figures and replica remote-reservoir 3.5″ shocks. The engine is a work of art, comprised of 9 different pieces, including licensed R2C air filters and a Whipple supercharger.
Front Disc Brakes
Powerful front disc brakes work in tandem with the rear motor braking for powerful and controlled 4-wheel stopping power. Sheathed cables clamp the calipers down on drilled stainless steel rotors for scale authenticity. A digital 2075 servo actuates the brakes through an adjustable linkage for greater braking precision and control.
Belted Paddle Tires
The Funco Replica’s aggressive paddle tires feature twice the traditional number of ribs for extreme traction off the line. A belted carcass prevents the paddles from distorting for maximum forward bite in the sand and powerful acceleration.
Internal Tube Frame
A rugged tube frame supports the entire Funco Replica body from end to end. The heavily reinforced structure protects the car in case of rollovers and provides a rigid mounting point for the wing and clipless mounts. When it’s time to release the body, simply pull on the self-energizing latches and the entire structure lifts off in seconds.
VXL-8s Power System
The Funco Pro Scale Replica features Traxxas’ most powerful brushless system, the Velineon®
Precision Driveline
With 30+ volts of brushless power going only to the rear wheels, the Funco Pro Scale Replica needs a radically strong driveline. Inside the massively reinforced case, huge module 1.5 wide-face transmission gears feed uninterrupted power to the wheels. A beefed-up X-Maxx differential with larger output cups engages steel driveshafts to form the toughest driveline ever outfitted to a Traxxas vehicle.
High-Visibility Whip Lights
Colorful whip lights rise over 10 inches above the body to provide a clear and bright visibility marker when storming dunes at 55+ mph. The lights are color-matched to the body to give the car a dramatic look. New Flex-Tech™ spring-loaded mounts allow the whip lights to bend without breaking in case of rollovers.
Pro Scale Experience
Traxxas re-engineered the X-Series platform to create a vehicle that would accurately replicate not just the look of the Funco machine, but also its mind-blowing driving dynamics. Grab full throttle on the Traxxas Funco Pro Scale Replica and you’ll experience the thrill and excitement of driving a top-tier 1000+ horsepower sand car for yourself.
New X-Series 2WD Chassis
A new low-CG 2WD chassis was engineered with focused development on even more strength and resistance to flex. A thick reinforcing brace unifies the front bulkhead and chassis into one cohesive structure for incredible strength and impact resilience. The rear bulkhead was redesigned to accommodate the ultra-heavy-duty transmission and differential.
8s Brushless Power System
The Funco Replica’s VXL-8s speed control features an aggressive tune that maximizes power output across the entire rpm range. The additional mid-range punch hits hard for rolling wheelies on demand. The Velineon 1200XL brushless motor is an 8s powerhouse that features increased cooling from a massive heatsink and dual fans.
Clipless Convenience
The Funco Pro Scale Replica’s clipless body easily removes and installs in just seconds, all while locking in place with incredible strength and security. The system uses a rigid internal cage to minimize flex body flex and hold the wing firmly in place. The LED whip lights use a single quick-disconnect plug to make body removal a snap.
All-New 2WD Transmission
30+ years of innovation have created the strongest transmission ever fitted to a Traxxas vehicle. The massively reinforced case holds the gears in perfect alignment with heavy-duty bearings for smooth power transfer. Huge, wide-face 1.5 module steel gears put extra strength where it’s needed most for dependable power delivery.
TQi Radio System
The high-output Traxxas TQi™ 2.4 GHz radio system delivers superior range, 30-model memory, and maximum control. Add the Traxxas Link Wireless Module (6511, sold separately) to send real-time telemetry to your smart phone using the free Traxxas Link™ app. Secure Battery Storage
Secure Battery Storage
The Funco Pro Scale Replica protects your batteries by positioning them deep in the chassis with full side protection. Rugged snap-lock retainers keep a firm grip on the batteries for intense action and high-flying fun.
Traxxas Stability Management
Driving a powerful two-wheel-drive vehicle on loose sand can be challenging for even the best drivers. Traxxas Stability Management®
High-Visibility Whip Lights
The Funco Replica's whip lights are color-matched to the body to provide a clear and bright visibility marker when running at high speed. The whip lights feature Flex Tech spring-loaded mounts, allowing them to bend without breaking in case of rollovers.
Optional Pro Scale LED Lights
Take your Funco Replica to the next level of scale realism with accessory Pro Scale LED lights (sold separately). Blaze a trail ahead with the front and rear LED light bars with high beam function and working brake/reverse lights. Add even more detail with the shock-mounted rock lights and side-mount pod lights or add underbody lighting for a dramatic look.
High-Performance Wing
A high-performance rear wing provides added stability for high-speed runs and integrates neatly with the clipless body for a highly accurate scale appearance. The wing mounts directly to the tube frame to soak up even the hardest landings.
Wheelie Bar
8s power and aggressive paddle tires make the Funco Pro Scale Replica a wheelie monster. The wheelie bar not only prevents backflips, but it also helps to absorb impacts on less-than-perfect landings.
High-Performance Tires
The Funco Pro Scale Replica comes prepped for desert duty with aggressive paddle tires that bite into sand for relentless acceleration and massive roosts. The arrow-pattern front tires provide the perfect amount of float for easy driving in deep sand. On hard packed surfaces the front tread pattern delivers a beefy contact patch for responsive steering and excellent braking.
Replica Beadlock Wheels
The Funco Replica uses all-new 3.6″ wheels modeled after the full-size Funco car. Bright simulated beadlock rings and color-matched aluminum axle nuts contrast the black wheels for a unique look.
Detailed Interior
The Funco Replica elevates scale authenticity with a fully detailed interior. A molded steering wheel and shifters are spaced accurately for the driver figure in front of the fully detailed dashboard with authentically replicated screens and gauges.
Smooth Undertray
Interlocking skid plates integrate precisely with the chassis to create a smooth undertray that glides over sand and absorbs ground impacts uniformly for predictable performance.
GT Maxx Shocks
Aluminum GT Maxx shocks with adjustable ride-height collars are built to replicate the huge 3.5″ diameter shocks found on the Funco Sand Car. Replica remote reservoirs give the shocks a fully authentic appearance. New extended aluminum bodies and shafts in the rear shocks provide additional travel to tame the toughest desert terrain.
Integrated Shock Towers
The shock towers are an integral part of the frame with massive buttresses to dissipate shock loads throughout the chassis. Heavy-duty receivers secure the clipless body latches directly to the towers for maximum strength.
Low-CG Chassis
The Funco Replica’s performance-focused chassis lowers the center of gravity for superior handling and stability. The dual 6700 4s batteries and steering servo position weight as low as possible in the chassis to improve performance and provide protection for these critical components.
Aluminum Heatsink with Dual Fans
The Velineon 1200XL uses an aluminum heatsink that wraps around nearly 75% of the motor’s exposed surface to pull out more heat. Dual electric fan shrouds draw cooling air from the body vents through the oversized fins for more effective cooling performance and longer run times.
Rock Solid Motor Mount
A rock-solid motor mount cradles the motor and locks it in place so it can’t flex or slip out of position. Four keyed pins set the gear mesh, eliminating the need for complicated adjustments.
Snap-Lock Battery Retainers
Hook and loop battery hold down straps are messy, frustrating, and steal time away from your driving fun. Traxxas engineering solves this with our proven snap-lock solution that securely holds and protects batteries.
Waterproof Electronics
You can never tell what’s over the next dune, so Traxxas outfitted the Funco Replica with fully waterproof electronics. A sealed receiver box with an easy access port protects the TQi receiver for all-weather driving.
High-Performance Steering Design
Dual-bellcrank steering delivers sharp handling and fast reflexes with the security of a heavy-duty servo saver. The double-shear servo horn is bearing supported to eliminate flex for precise steering at high speeds. Special vents keep everything running smoothly by evacuating sand away from the steering components.
Rugged Skid Plates
Three rugged skid plates key together tightly to protect the chassis from damage. The front skid plate tapers up to meet the body to prevent the nose from digging into the sand after a hard landing.
Heavy-Duty Suspension Arms
Heavy-duty suspension arms are made from Traxxas' toughest material with captured double-shear connections for incredible strength. A polished aluminum finish gives the long-travel arms a fully authentic look to match the full-scale car.
Oversized Sealed Bearings
Extreme HD front and rear hub carriers feature oversize bearings to send the Funco Replica's brutal 8s power efficiently and reliably to the wheels. Full-contact bearing seals help to keep out sand and grime for less time spent on cleaning and maintenance.
Ultra-Heavy-Duty Driveshafts
The Funco Replica's rear driveshafts are the toughest ever fitted to a Traxxas vehicle. New beefed-up differential output yokes are even larger than X-Maxx. Power feeds to 17 mm splined aluminum axles through steel CV driveshafts to maximize suspension travel and durability.
Sealed 4-Gear Differential
The Funco Replica uses the same battle-tested internal differential gears from X-Maxx, but the housing has been massively beefed up with a huge 1.5 module ultra-HD straight-cut ring gear for uncompromising durability. The differential is sealed to allow limited-slip tuning with different viscosity oils.
Direct-Drive Transmission
A direct-drive transmission provides instant throttle response and uninterrupted power delivery. Traxxas reinforced the transmission case and outfitted it with huge 1.5 module gears for bombproof durability.
1.5 Module Transmission Gears
Ultra-HD transmission gears are cut to a massive 1.5 module profile that’s 50% larger than standard X-Series gears. The wide-face profile provides a larger contact surface to ensure maximum durability in the face of extreme 8s power.
Functional Disc Brakes
A 2075 digital servo actuates the powerful front disc brakes through an adjustable linkage for fine tuning. The braided-steel brake cables are sheathed in a protective casing and secured to the suspension arms to guard against damage.
Realistic Brake Rotors
The brake cables operate a cam lever which squeezes brake pads onto the rotor for powerful braking performance. The calipers are spring loaded to reduce friction when not in use. Steel brake rotors are slotted and drilled for added cooling and an authentic appearance.
