What am I missing? Took the motor off to replace the ESC and I can't figure out how to remount it. Did I lose a bushing somewhere? The bottom hole needs something in it for the lower screw to thread into.
On the blue transmission plate there should be a black plastic cylinder mounted with a screw that fits inside that large smooth hole. It's the pivot point to set the gear mesh. The top small threaded hole is used to hold the motor mount in place after setting the mesh.
Yep it's weird but it works. Seemed like it was missing something too.
Those who forfeit liberty 4 security get neither
Thanks guys. I knew I did something wrong. I mistakenly removed the lower screw and now I can't find that post. How would I go about getting another one?
"Happiness depends upon ourselves." -Aristotle