Hi, I have a couple questions.
1. While charging the 2s 4200mah lipo the charger balance charged it only up to a little over 2000mah or a little more like about 2200mah. Shouldn't it charge up to 4200mah or is this because of what storage was left in it, battery is new so I figured there was still volts in it for storage. Just seems odd that it only was charged that much. I now I had the charger set up for 2s lipo 7.4v and 4.2 amps on balance charge. Is this normal.
2. Ran the lipo til noticed the truck slow down then put it on storage mode. It seems to be only set for automatically charging to storage at 0.1 amp which seems really low. So will it charge the battery to a storage setting for the battery. Seems I can only set the storage mode for battery type but can't set the storage level. Will it be ok or am I missing something. I've gone out to check the lipo and seems fine so for but at 0.1it looks like it's going to take a while.