Results 1 to 14 of 14

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    RC Turnbuckle Jr. Jezza's Avatar
    Join Date
    Feb 2013
    Montreal, Canada

    Question Instaling a high torque servo BEC question

    Hi guys,
    I have the MMP and the internal BEC could be changed using the link application;
    I would like to install my tactic TSX55 ultra torque servo which can pull 203 oz at 6v , will probably get the digital version later on TSX 57.
    I chose a high torque servo since the power comes all from the back on the 2wd, less speed but I think it will be a good set up for my heavy FLM build
    My question is , is it better for me to get an external BEC or just run it off the ESC and change the setting via the application. When and what situation will you guys use another BEC any way. Or only when you get a higher voltage servo.......
    Does it really matter to get a BEC since it will run under 6V just like my 2075, what's is the difference if I just plug and play like the 2075.
    Thank you
    Last edited by Jezza; 02-16-2014 at 11:25 AM.
    Live life to the fullest

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts