Results 1 to 3 of 3
  1. #1

    Lipo charging problems

    I have 4 5000mah 2s lipos that only charge to about 2185mah then stop and say full they are all new (like 5 cycles) I have a Hitec X1 touch charger and sometimes when charging i will get an error message reading over capacity limit. I charge the batteries at 5 amps and balance every time i charge them.also im running 2 of them in my summit and only get like 5 mins of runtime is that normal? Please helpp

  2. #2
    Marshal Dadx2mj's Avatar
    Join Date
    Aug 2007
    So Cal
    What brand of lipos are we talking about here?
    BlindMan Racing
    Rusty - MERV - Pede 4x4-Alias
    SPC Lipo Power

  3. #3
    RC Turnbuckle Jr. jamann's Avatar
    Join Date
    Sep 2009
    Victoria B.C Canada
    Use a multimeter and check each cell individually to see what they are at.
    Also is the mah capacity on your charger set to low maybe.i turn mine off

    Sent using lipo power
    Mountains cant stop me
    they have tried

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts