Results 1 to 4 of 4
  1. #1
    RC Competitor
    Join Date
    May 2011
    Location
    San Diego, CA
    Posts
    85

    HELP! TQ Link was not used for a year and now it will not work.

    So I stored my TQ Link for a year with no batteries and now it will not work. It binds and the trim works but no steering or throttle and that is with any receiver.

    I was told that I have to reset the endpoint calibration on the radio but can't find any instructions on how to do this. PLEASE HELP!
    Summit; ERBE; E-Slayer; MERVs
    Wraith; AX10; RX10

  2. #2
    RC Turnbuckle Jr. Wolfslash16's Avatar
    Join Date
    Mar 2012
    Location
    Riverton Utah
    Posts
    4,509
    Have you tried restoring the factory settings? Don't worry, it won't reset the memory of linked cars. I would try that. Are you talking about the TQ 2.4 with the antenna?
    2SummitE/TmaxxVillainSlash2&4SlayerPndeTeton

  3. #3
    RC Competitor
    Join Date
    May 2011
    Location
    San Diego, CA
    Posts
    85
    Yes, I tried restoring it to the factory settings and its a TQ 2.4 model #2238. There is some kind of procedure where the radio itself get calibrate on the actual travel of the steering and throttle, similar to what you have to do with a Spektrum radio.
    Summit; ERBE; E-Slayer; MERVs
    Wraith; AX10; RX10

  4. #4
    RC Competitor
    Join Date
    May 2011
    Location
    San Diego, CA
    Posts
    85
    Called Traxxas customer service and I was walked through the process of resetting the radio endpoints, It is now working.

    Thank You Traxxas!
    Summit; ERBE; E-Slayer; MERVs
    Wraith; AX10; RX10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •