Results 1 to 3 of 3

Thread: 3s lipo

  1. #1
    RC Qualifier
    Join Date
    Nov 2013
    Location
    Oregon
    Posts
    654

    3s lipo on stock gearing

    hey guys i was wondering what kind of setup works best for this car. im still learning my way with RC cars so i still dont know how to change pinion gears. Will i need to switch anything around? or should i be okay with stock gearing on 3s lipo?
    Last edited by RallyX3s; 11-23-2013 at 12:07 AM.

  2. #2
    RC Champion
    Join Date
    Nov 2012
    Location
    Nashville, TN
    Posts
    1,968
    Quote Originally Posted by RallyX3s View Post
    hey guys i was wondering what kind of setup works best for this car. im still learning my way with RC cars so i still dont know how to change pinion gears. Will i need to switch anything around? or should i be okay with stock gearing on 3s lipo?
    We don't know your driving habits, so it's hard to say.

    To play it safe , I'd say gear down a couple teeth on the pinion gear. Then, you can always gear back up if it tuns within safe temperatures. Also, sway bars will help quite a bit to deal with the additional speed and power.

  3. #3
    RC Qualifier
    Join Date
    Nov 2013
    Location
    Oregon
    Posts
    654
    I'm not too hard with the car. I don't take it off road or anything like that I use it strictly for road use. I basically just drive on flat ground going full throttle once in a while.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •