Just realized I never started a thread on this one.
It's been a slow process because I have a broken hand.
It's been a real lesson in patience working this way.
I picked up this Summit in a trade and it needed some tlc.
I've decided to turn it into somewhat of a crawler.
So far I've installed...
Axial 27t brushed motor with the stock XL 2.5 esc
Tenbol mount and STRC motor plate
Integy servo saver
It has dual 2080 servos in it right now...but may replace them with a single Hitec servo
As far as other mods/repairs...so far I've...
Did the crawler transmission flip
replaced all 4 axles with Merv axles
replaced servo saver bushings with bearings
replaced front toe links
rebuilt front carriers with 7033x caps
replaced the bumpers
locked the front diff
shimmed the front bulkhead
rebuilt the front shocks
Still to go is...
replace the front push rods
install bearings in the front rockers
replace the rear push rods
replace the rear toe links
rebuild the rear carriers with the 7033x caps
lock the rear diff
shim the rear bulkhead
rebuild the rear shocks
I'm also going to replace the stock white body with a red one.
I haven't decided if I want to install lights...but if I do...I want all the front/rear bumper lights and the lightbar to work.