Problem with 5800mah LiPo
I got a problem with my LiPo/NiMh Traxxas charger. It charged only one of the two cell. But now I have the EZ Peak Plus charger and I can see the Voltage on each cell. And it's not the same. When I charge, it show 4.12 Volt on the 1st cell and 3.69 volt on the second.
I tried to discharge to see if both cell with discharge at the same level, but I got an error on my EZ Peak plus. Low voltage or something like that.
What can I do to restore the 2 cells at the same level?
I cannot play with my Telluride for more than 10 minutes with the battery like that, before, I could play for about 45 minutes and more... the batt have less than a month!
Thanks for your help!
My battery is a Traxxas Power Cell 5800mah 2S LiPo
Contact Traxxas support. This sounds like a warranty issue they should correct