Hello I'm having a tire problem on my emaxx brushless MM2 I have ripped 4 sets of tires off my Emaxx and I'm sick of replacing them I
Ripped one off today and I'm wondering if there's a set of tires I can get that can stand 65mph and not
Ballon as much as stock tires and have good tred on them thanks I run 2 3s 5000mah 25C lipos and 28t
Pinion and 65t spur
You need to get ProLine tires & Beadlock rims which will let you tape up your tires. Tape will keep your tires from expanding, and it wouldn hurt to balance your wheels too.
+1 on balancing your tires. Makes a big difference, especially if you want to go 65 mph with one of these things.
Last edited by EMAXXBRUSHLESS; 09-23-2013 at 07:36 AM.
I like the sound of beadlock so I don't have to keep glueing I found these 3 I was wondering if these are good and which one axials rims on panther slicks
Can someone explain to me what beadlock wheels do? Do they allow you to not have to glue your tires to the wheels? I'm new to this. Any elaboration?
Those Panther 3.2 slicks are for 3.2/Maxx sized wheels. The wheels shown are 3.8/40 series.
I just bought the Panther slicks. Some of the thinnest rubber I've seen. About 1/16" on sidewalls and footprint. I trimmed the bead off and am fitting them on 40 series wheels. Its just for kicks because I know they're going to tear apart.
If you want durable slicks, look into Ipanema's Monster Slicks. http://brucknerhobbies.com/catalog/p...oducts_id=1058 (they come in 40 and 45 shore). Premounted and they're supposed to be belted.
I was seriously disappointed. I had hi hopes because I have Panther Pythons and their sidewalls are insanely thick. Thicker than any Proline tire I've seen. But the slicks are kinda sad. I'll take a pic of them on 40 series wheels to show you - they look cool, but sidewalls are just too soft. The wheel lips are gonna scrub big time. I'll trash them in a parking lot. lol
I've never run beadlocks but I hear guys have better luck with the tire staying on if you add some gasket maker/sealer to the beadlock.
These are the whells and tires I bought that are coming in the mail
Last edited by first rc car owner; 09-28-2013 at 12:16 AM.
I have the Big Joes on the Axial 8 spokes same as you ordered. You are going to need 2 sets of those Big Joes tho.
Yes I know I order it and had to get all the stuff again to take a pic but did not realize that big joes said 1 but I ordered 2
Yeh theyaeres tupid big compared to stock lol