Results 1 to 2 of 2
  1. #1
    RC Competitor
    Join Date
    Feb 2013
    Albuquerque, NM

    Lipo Batteries and charger questions

    I got my SPC 8200 2s lipos in and a new Hitec X4 charger. What is the charge rate for these batteries, according to the math it would be 8.2 amps, but the charger only goes to 6.0. Is this a safe setting? And what is a safe discharge/storage rate?

    Has anyone out there run this charger and could you give me some guidance on set up?

  2. #2
    Marshal Dadx2mj's Avatar
    Join Date
    Aug 2007
    So Cal
    These questions need to be directed to the manufacturer or vendor you bought the products from. SPC packs come with pretty good instructions and they offer great support. Charging the packs at 6 amps is safe but will take longer than a typical 1c rate would.
    BlindMan Racing
    Rusty - MERV - Pede 4x4-Alias
    SPC Lipo Power

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts