Congratulate me, yestedey I had my first crash. Represent my broken slayer in next photo:
And have some questions:
1) For #20 & #21 photo this is #5321: Suspension pin set. This is pins have broken sign, but have corrosion in broken place. and size for long 61mm for long party & 24mm for short party for both pins Is this normal or it is broken pins?
2) for #08 ftp://butyaev.dyndns.org/public/crash/DSCN1422_R1.JPG
and #09 ftp://butyaev.dyndns.org/public/crash/DSCN1423_R1.JPG this is 5914 Differential kit, center on this photo les litle "ear" how much it is important? The differential it is very expensive for my now.
In monday i will shoot place where this happened.
how i can include picture on sire ?? test imaje [IMG]ftp://butyaev.dyndns.org/public/crash/DSCN1420_R.JPG[/IMG]
Last edited by Alexsy; 04-27-2013 at 01:19 AM.
Please help me. I can use the old differential with these injuries?
If the pins are still in one piece there fine just clean them up and use them. A little rust is normal if you don't take everything apart and clean it very often. As long as the differential itself isn't broken there's no reason to replace it. Just fix what is broke and have fun.
I wouldn't recommend Integy parts they break as easy as plastic or maybe easier in my experience. And half the time they don't fit right.
Thanks! I have experience in technical science. i know the impact must be distributed to all construct and some party must be broken. I see this diff case and make deduction about the broken "ear".
I am again on wheels
So it's fixed now?
O yes from 04.24 to 06.06 i am wait paty from USA. 3 fuel tank use to day