Alright, so on my controller when i push the "Trigger" forward to apply the brake it does the oppisite and opens the carb. and when i try to give it gas it brakes. so its like the remote is giving oppisite commands of what im telling it to do.
If you have one of those old tq remotes, you should see a two tiny switches near the bottom. There is a channel 1 switch, and a channel 2 switch. Just push the channel 2 switch to the other side. Your servo was reversed. Hope that helps!
its the latest 2.4ghz remote, i just put it on it
You have to reverse the channel setting through the menu settings in the radio.
Jato 3.3, Revo .28 JL Max, Nitro Stampede 3.3
What kind of on board battery u using?
Jato 3.3 Pede 2.5R Rusty 3.3