I have a 1/16 slash, and the antenna wire got severed. I soldered it, then covered it in electrical tape, but since then I cannot drive it, and sometimes when it does work, full forward is break, and full reverse is full throttle.
Last edited by qwert12345as; 03-21-2013 at 08:32 PM.
by the way welcome to the forums!
Last edited by revoman78; 03-21-2013 at 08:58 PM.
With great brushless comes great responsibility.
the antenna wire is a coaxial cable . small wire in the middle
did you try reversing the channels on the tx? i suppose this wouldnt help w it only function intermittently......if fairly new try calling traxxas
Bad news is you are going to need a new reciver. If you recently bought it you might get luck if you are hones with traxxas and they might take care of you. I doubt it but worth a try, just be honest.