I am doing a PL pro2 build..... I am using all the parts in the kit except for the rear shock tower (BTW this kit is for the electric slash because they don't make one for our trucks yet)and this I will go with RPM. to get multi adjustment holes for the rear shocks.The A arms are ten mill longer front and back and you need to run 0 o/s wheels to keep the stock look.This should take this truck to the next level.[IMG][/IMG][IMG][/IMG][IMG][/IMG]I will post more pics this week as too what worked and what didn't
Here are some pics of the new and old A arms. So far the only issue is I will have to drill holes for the lower shock mount on the rear arms and grind the chassis a little for clearance for the rear arms[IMG][/IMG]. [IMG][/IMG]
Im excited to see how this turns out! Ive thought about installing the proline suspension kit on my nitro slash but i was not sure what parts would fit and what wouldn't. Keep us posted!
Here is the front end all put together..... Pro2 front bumper,bulkhead,shock tower,hubs and spindals[IMG][/IMG] this one is the Pro steering kit.[IMG][/IMG]
Here is the rear A arms with the holes drilled in them for the lower shock mount.[IMG][/IMG]this is where you will need to grind a little off the chassis[IMG][/IMG]
Here is the rear all bolted up..... Everything is Pro2 but the shock tower it is stock and all I did was move the shocks to the outer hole[IMG][/IMG][IMG][/IMG]
How come you didn't buy the protrac kit?
I wasn't sure what all would fit.... Plus I got all the other stuff that is not included in the kit like axles, front hubs,front bumper, hardened pins, ect....
Here it is all finished up minus a few things.......[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG]
That body is wicked! Can't wait till TORC 2013 starts...
Hi, great kit, I am looking forward to receiving my protract suspension kit in the mail and can't wait to install. I am fairly a newbie, and was looking over my nitro slash. does the whole rear (including battery slide right out all in once piece? do these mainly cosist of the bottom screws? I currently have one loose screw that needs tightening and is very tight without probably pulling most of the back end out.
I really like that Dodge Ram body.
"enjoy your ride"
Quick question - what kind of rims and tires do you have on there? A link would be greatly appreciated. Thanks again, and awesome kit.
I have a slash 2wd and I think I have same tires and wheels they are proline split sixs on proline calibers
Yes I do have a Traxxas...
So how does the truck perform now with the Pro-line parts?
Nitro Slash 3.3