I just installed a new rear diff and now my truck doesn't roll. When I push the truck forward all four wheels want to lock up. If I hold the front end up and push forward the front wheels spin backwards and vice versa. What did i wrong thanks
Last edited by paulfromtulsa; 02-25-2013 at 01:15 AM.
You put the diff in backwards. Rotate 180 degrees
Ring gear is facing the same side as the front should be opposite
Take the diff case out of the bulkhead and flip it over and put it back in
This is how it should look
Last edited by 50togo; 02-25-2013 at 10:24 AM.
just fixed it thanks guys
I've done that once...bet that wont happen again .
Rock n Rolla !
I did that years ago! Really makes you mad! Get it all done and ready to run, just to find out you have to do it all again!
Always good to take a marker and mark the top. I don't need to anymore as I have done so many!