Results 1 to 12 of 12
  1. #1
    RC Qualifier
    Join Date
    Nov 2011
    Posts
    404

    MMP 2400kv esc traxxas connectors not going on all the way?!?

    Here's my rally's combo the MMP 2400.
    And the connectors for the battery wouldn't go on completely...maybe I've done something wrong? No matter how hard I push, they won't make the "click."
    Here's a pic-


    Any help would be appreciated thanks
    Last edited by Nitroelectric; 03-07-2013 at 07:40 PM.

  2. #2
    RC Turnbuckle Jr.
    Join Date
    May 2011
    Posts
    7,261
    how much wire did you solder on the lead? do you have pic of it off the plug?
    humay has left the building, peace.

  3. #3
    Marshal ksb51rl's Avatar
    Join Date
    Nov 2006
    Location
    Northern NJ
    Posts
    18,615
    You may have soldered past the limit line.
    Alt-248 on the number pad =

  4. #4
    RC Racer
    Join Date
    Jan 2013
    Location
    Delaware
    Posts
    123
    The solder "limit line" is very unforgiving if you cross it..... also make sure you soldered to the proper side of the terminal.
    good luck, and if everything is correct it should snap in fairly easy

  5. #5
    RC Qualifier
    Join Date
    Nov 2011
    Posts
    404
    I had a friend do it for me and now I'm regretting I did. This is bad, got a gut feeling. If it is soldered passed that point, what do you do? It still works the way it is, but its just annoying because it keeps slipping out.

  6. #6
    RC Qualifier
    Join Date
    Nov 2011
    Posts
    404

    That's one

  7. #7
    RC Turnbuckle Jr.
    Join Date
    May 2011
    Posts
    7,261
    i would take about this much off (black line) with a sharp hobby knife and if needed more..take it little by little
    humay has left the building, peace.

  8. #8
    RC Qualifier
    Join Date
    Nov 2011
    Posts
    404
    Okay thanks ill try that now

  9. #9
    RC Qualifier
    Join Date
    Nov 2011
    Posts
    404
    WOOHOO. Thanks man. I shaved a bit off and got the click. Should it go any further or once it clicks its done.


  10. #10
    RC Turnbuckle Jr.
    Join Date
    May 2011
    Posts
    7,261
    heres mine from my Mamba,


    once it click its done.
    humay has left the building, peace.

  11. #11
    RC Qualifier
    Join Date
    Nov 2011
    Posts
    404
    Cool thanks for your help man.

  12. #12
    RC Turnbuckle Jr. DiggerPede's Avatar
    Join Date
    Apr 2011
    Location
    Texas, ChevronPhillips Chemical Plant along the Gulf Coast
    Posts
    7,176
    Yeah when you solder that's the toughest part is staying behind the line and not having to much on there. At first when I was learning it took me a few times to get it just right. Then pushing them in there with a flat head screwdriver.

    I see why many people love deans connnectors. I bought a dozen M/F a while back. I just havent talked myself into swapping the fleet over.
    Weak Revenge
    Strong Forgive
    Intelligent Ignore

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •