noob here. just got my slash a week ago. bad wiring out of the box (red to black, black to red from motor to esc).
now i cant get the slash to run straight.. wheels just dont align center unless you adjust the trim. i just want to have the st trim knob centered and the wheels straight that way i can still adjust.
any tips how to fix this.
You should re align the servo. Best how to would be YouTube. I'd start there and if that doesn't work post back.
2wd slash, PL LCG, CC 3800, Powerstrokes, S6040
horn is the white part direct contact with the servo right? yeah i got t adjusted, still a little bit off to the right but manageable with the trim. may i ask how tight should the horn be connected with the servo? just enough torque so the screw wont turn clockwise anymore or just right to make it tight?
i just make it tight so the screw dont come out and if your saying its still off a little thats where your problem is you need to have the POWER ON when you do this that way the Servo is at its CENTER
Anza Slash & a pile of Parts