How do I know the brake is working on my E-Revo?
when you push forward on the throttle and it stops!
I think the brake is disable. I think I have to setup the transmitter.
The brake of the little Revo is Not as good as you could expect.
Dont try it but many say if you Change the Esc the brake will be more powerfull.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Did you change the 50/50 settings to 70/30 without programming?
I have heard the factory brakes are weak from a few people, and I have heard they are overpowered from a few people. From my experience, they were strong enough to make it endo.
I set the transmitter to factory default, and the brake is working fine. It just slow down and stop.
Just plan ahead and leave plenty of room for stopping!
on my MERV the brakes are useless.
I on a training mode, and the braking is working very good. I have not run at high speed, yet. What r u guys complaining?
My brakes are great on my merv. Something must be wrong with the other cars. It will almost endo if I hit the brakes hard.
Some have good brakes and some have weak brakes. Must be all in the esc
The reverse braking is stronger than forward braking. Is that normal or it is all in esc?
Not really sure mine locks up and slides with stock tires when i hit my brakes. When i reverse and hit forward thats not brakes thats forward lol
Iv noticed alot of comments on brakes on the merv. My thought ( correct me if im wrong) the brushed guys say good brakes the bl guys say weak brakes????