Got my Revo 3.3 out of storage, charged every thing up, fueled it. Tried to start it. Cranks fine, but won't pull fuel from tank to carburetor? Dad says he had same problem, had to replace piston rod and that worked. So that's what I did. Didn't work?
Last edited by rdhowdy; 01-24-2013 at 07:38 PM. Reason: Spelling
Cracked fuel line perhaps?
Make it idiot-proof and along comes a better idiot
try blowing the fuel to the engine through the exhaust line. This should get it started. It could be the seal around the fuel tank cap. First how did you try to prime the engine, over the exhaust or the carburetor intake?
You could have a leak in the exhaust at the coupler, at the header, or your fuel cap could not be sealing. Did you change the piston and sleave, or the rod?
sent from my not so smart, smart phone
Rusty 2.5R,T-max 2.5 & 3.3,Summit VXL Nitro 4-tec
Maybe you need to crack the throttle a little bit. Sometimes the tiny passage through the lsn can plug up, so you may want to see if it will pull fuel with the slide open a bit.
erbe emaxx 26maxx s27revo 18tmrevo XXL platinum