My buddy just bought everything and had me do the conversion for him so I got all the part numbers and descriptions to do the conversion...and prices !!! Im thinking about doing it too !!! If I don't do it... I might just leave it as is and replace axles when needed and just buy a new T-Maxx 3.3 instead of doing more upgrading... Enjoy...
.15 TO 3.3 AXLE CONVERSION PARTS LIST
#5143 TURNBUCKLES (ROD) 5.0 MM (2 PACKAGES) X $10.00 = $20.00
#2580 3X20 SCREWS (You get 6 in a package) (1 PACKAGE) = $2.50
#5132R LOWER SUSPENSION ARMS (2 PACKAGES) X $7.50= $15.00
#5131R UPPER SUSPENSION ARMS (2 PACKAGES) X $7.50 = $15.00
#5451X DRIVESHAFT ASSEMBLY (4 PACKAGES) X $12.00 = $48.00
#5378 PIVOT BALL CAPS KIT (2 PACKAGES) X $6.75 = $13.50
#5347 ROD ENDS W/HOLLOW BALLS (1 PACKAGE) = $9.00
#5334 AXLE CARRIERS (2 PACKAGES) X $ 8.00 = $16.00
#5120 12X18 BB (2 PACKAGES) X $8.00 = $16.00
You have to re-use your old 8 pivot balls and the 4 outer bearings otherwise you will need to buy those also.
NOT RE-USING OLD AND JUST BUYING EVERYTHING
#5117 6X12 BB (Ball Bearings) (2 PACKAGES) X $4.00 = $8.00
#4933 Pivot Balls (2 PACKAGES) X $6.00 = $12.00
NEW TOTAL W/EVERYTHING
Last edited by WILD72; 10-19-2007 at 03:42 PM.
Nice list of parts and breakdown...
Too bad I started with a 3.3 .....
When all else fails....10lb sledge hammer.
That's too expensive!!! Just go to ebay and get it cheaper.
NEW TRAXXAS T-MAXX REVO 3.3 AXLE CARRIERS/KNUCKLES WITH BEARINGS, PIVOT BALLS, DUST BOOTS
NEW TRAXXAS T-MAXX TMAXX 3.3 TURNBUCKLES WITH HOLLOW BALL ENDS
NEW COMPLETE TRAXXAS T-MAXX REVO 3.3 DRIVESHAFT DRIVELINES AXLES
NEW TRAXXAS T-MAXX TMAXX 3.3 ARMS W/ SHIMS & PINS, Get 2 sets of these
I bet you this is a lot cheaper than what you are going to spend with your list. $60 without shipping.
By the way, this is what I did for me emaxx (excluding a arms).
Last edited by george16; 10-19-2007 at 09:21 PM.
Going to check this place out
Actually just moved it up so I can find it easier next time. Hobbies Gone Wild, the links you put up.
Originally Posted by Just2Dvs
Oh ok. Just put them in your favorite vendor list in your "My ebay".
Yeah I'm still waiting for the email from Ebay, forgot my username.
I just did this conversion and though I have not been able to drive it yet the stance and looks are awesome
Ok I'm doing the conversion also and just wondering what the screw set is for? It's been a few years since I've worked on my truck to bear with me I'm almost new again.
The screws would be for the axle carriers to attach the toe links.
I really cant believe someone paid that much for the conversion in 2007.
No slipper/tall gearing/power = broken parts.