how do i remove the steering assembly from the posts to get to the lower bearing?
Just tried but didn't work and I didn't want to force it.
Is there are certain technique?
You do have to put a little muscle into it, it will come apart
Just make sure to remove the drag link and linkage first, then give a good pull.
Sent from my iPad using Tapatalk HD
Never trust an "Atom", they make up everything.
You can use a pair on needle noose under the bearing (not on) to give you a little more surface area to pull on. Those guys can be on there pretty hard!
Stampede 4x4 vxl w/ MMP/2400kv, Mini E-Revo
The whole assembly will come off without removing anything but the two top screws. The bottom bearings will probably stay in place but you remove them the same way.
Thanks. I already managed it.
Did it exactely the same way