Results 1 to 5 of 5
  1. #1
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Royersford, Pa
    Posts
    542

    XO-1 KNUCKLES, Front steering & rear carriers

    Quick question, can the XO-1 KNUCKLES, Front steering & rear carriers be used on the slash 4x4 w/ the stock axles?
    Thanks!
    STRC Slash 4x4
    Hobby Hut Raceway, Audubon Pa.

  2. #2
    RC Turnbuckle Jr.
    Join Date
    May 2011
    Posts
    7,264
    No, the XO-1 uses 6mm stub axle while the slash 4x4 have 5mm. although if you buy all the XO-1 driveshafts along with those knuckles, then yes it will work, but here a thing about it, you have to use the 17mm hexes or buy the tekno M6 12mm hexes.
    humay has left the building, peace.

  3. #3
    RC Qualifier
    Join Date
    Mar 2011
    Location
    Royersford, Pa
    Posts
    542
    Thanks! thats kinda what i was thinking but i wasnt sure
    STRC Slash 4x4
    Hobby Hut Raceway, Audubon Pa.

  4. #4
    RC Turnbuckle Jr.
    Join Date
    May 2011
    Posts
    7,264
    no problem.
    humay has left the building, peace.

  5. #5
    RC Racer
    Join Date
    Sep 2012
    Posts
    173
    Yes, you CAN use the XO-1 parts on the slash with the stock axles. All you would need is (6) six 5x12x4 bearings instead of the 5x11x4 bearings. It would actually be a slight upgrade since the actual ball bearings inside will be slightly larger.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •