Programming Mamba Monster for LiPos
Hey guys -- to make my life a little easier, I bought the Castle Creations ESC programmer.
My question is, what setting am I supposed to use for 4S power: "Auto LiPo?" or a specific voltage per cell?
Thanks in advance!
I would use auto lipo. And the normal 3.2 volt cut off voltage setting. some people set the cut off a little higher. 3.4
I would set your cutoff to at least 3.4v you aren't going to lose much runtime by doing this and it will save your batteries in the long run. Good luck and have some fun.
Sent from my iPhone 5
Some companies like spc even recommends 3.5 to be on the safe side
Sent from my SCH-I535 using Tapatalk 2
Beautiful. Thanks as always.
Tags for this Thread