I added a remote start to my slayer pro and it works like a champ! I have three other buddies with the same exact setup and its been proven reliable.
Its a R.O.S.S. by losi that is a direct plug into your ez start plug.
And last you need a battery to run the whole deal. IT HAS TO BE A 7.4v 1000mah 2 cell lipo to not burn up your servos.
I mounted a toggle on and off switch the carry handle to turn power on and off.
I have the spektrum DX3C transmitter and you can plug the ross control unit into the aux port, assign a switch to aux 2 position and your good to go. there are some mods ive seen here where you can modify your traxxas remote to do the same.
Last edited by GvilleFloridaSlayer; 01-08-2013 at 12:50 PM.
The only thing thats not pictured is the Lipo mounted the front shock towers
Looks nice! Yea I just recently purchased a DX3S the other week that comes with telemetry for one truck. Just might have to get the R.O.S.S. set up for mine. Cause I did notice a button on the TX for push button start...
I already done that with my T-Maxx with the ROSS system and I am using a 2s 1600mah lipo battery...
Here is the link (start from post #28) :