A quick, simple and easy way to add weight (and the ability to
quickly adjust them) to the front of your summit.
drill two small holes into the axle carriers, taking care not to hit the center axle nor
the arm screws.
make weighted metal plates, drill holes into them to match the holes in the axle carrires.
(MEASURE TWICE, DRILL ONCE)
screw the plates onto the axle carriers
You can stack the plates up or use different thickness plates to get the weight you desire.
Easy to change weights (or remove them for bashing) and since the weight is not on the
wheel there is no need to balance the wheels. Just be certain the left weight matches the
right weight. Also beware that the axle carries are slighlty curved, anticipate and adapt.
Use long screws for a secure hold.
I cannot take credit for this, saw the original on RC Crawler by a member named "MonsterZ".
I just embellished the concept and added some hot sauce.
just more good FAQ fodder
Last edited by noir 522; 04-24-2013 at 04:20 PM.
MAN, Use Common Sense.
Outside? THERE IS NO BOX !