This is my Master plan on how i use 1/10 batteries in my 1/16 scale truck.. Enjoy hopefully i will give you idea and i had a medal one but it messed on my interference with my crappy 27 mhz and it went Full throttle in a tree and smashed it so yeaa
Last edited by RC-nightmare; 01-03-2013 at 11:54 PM.
Ask any Question i will Answer
do be careful if you're mounting a lipo battery on top, of it rolls on pavement you can scrape the protective film off the lipo pack, my recommendation has always been max out the battery trays, 1800mah 3s or 2250mah 2s, in parallel that's similar capacity to a 1/10 scale battery pack in a lighter package that doesn't need as heavy of a current.
I like turtles.
1:2200 mah 2s traxxas pack;35
2:2200 mah 23 traxxas pack;70$!!!!!!!!!!
1:5000 2s 65c gens ace 40$
do you see where i am going with this
Which is more exspensive... it also cant be runned in other 1/10 scale!! trucks and it has more capacity then all the other mini batteries!! and it wont mess up my battery i plan on making that cover out of sumthing stronger and i plan on covering the wire better
so you jsut kill the aerodynamics of the vehicle and mess up the weight balance
when you could get 2 of the 2s from spc that are 2500 mah and $20 each.........
i can hit 25mph with my brush aerodynamics seems to be fine and it jumps good in the air as long as i am following threw with the power if not i will do a back flip not likes that a bad thing and the 2 spc 2500 mah cant be run in 1/10 scale!!!and i can still put my grave digger bodie back on and everything will be stock again and i might get those pack for 20$ sound good!!!
You can get 2S 2200mah for 8$ ... do you see where i am going with this
try the 12000 mah XO-1 battery!
Whatever you are, be a good one.
heres just one link out of hundreds..... and they are in the states!
Welcome to Traxxas.com Yes, EVERYONE here IS a Pro Racer.... [/sarcasm]
Guys i can still do all this the body is not permanent its removably then i have regular car but i will surly being giving these batteries a look and yea i see where your going with this!! its just that you cant use these batteries in 1/10 scale truck the point of these is to save money but go big i have done that but i guess it wasnt such a good idea then :/
These trucks are already some what challenged by a high COG, put that much more weight that much higher up it just exaggerates the problem that much more.
Rusty - MERV - Pede 4x4-Alias
SPC Lipo Power
Too Tell the Truth i cant tell much a difference with my other body on i am putting some offset wheels on their to help with that problem!!
Last edited by RC-nightmare; 01-04-2013 at 02:25 PM.
You should throw a bug body on there so when you roll it you have a better chance of it flipping back over!
i Will Try and Find one