Anyone ever done this I have a 3906 that 4sdash is converting to a 3905 I had mmp and a 2400 laying around so we are going to put in the maxx and see what happens. To be honest after seeing his 48mph vxl 3906 I think a 2400 should be able to move the truck ok. I know its not going to fast but i don't want it to be. Just wanting to know if anybody else has done this.
Shouldn't be any issue at all.
Whatever it is I just typed... could be wrong.
Be careful. Its only rated for 120 amp burst and 2400kv is a little high for a monster truck. You might find the amp draw off the mark is more than the ESC can handle. You will need some big lipos to try and keep the caps from smoking.
The other issue you may have is the BEC. You may well find that the servo is asking to much from it.
" TRX3922a doesnt snap " IT SHATTERS !!!
I ran the SCT 2400/MMP system in my 3906 and it performed Great! It really comes down to how much the truck weighs to how well it will work. My 3906 has an AUW of 8.6 lbs and the system ran very cool.
I have a video of it in the E Maxx video gallery (post #30) running with 20 "C" 5000mah lipos.
Scrapper, I have a video of my old 3906 with my 2400 in it on 3s. Pm me your number and ill send it to you.
Sl4sh mmp2400 - savage flux hp XL - vorza flux hp
Thanks for the responses cant wait to ger it done.
some pics of the 3906 to 3905 conversion
no gear crutch here its has plenty of power if i can get a 3906 to run 48 with a vxl that doesnt over heat i think this will be fine
bump this up for baldy daniels