I have the brushed Revo (well xmas for my
He's only used it 3 times. Now it went out of sync or something and the receiver won't turn green.
The battery in the car is fully charged, and the light on the receiver is solid red.
When I press the ezset button, it goes to flashing green. Instructions say its not making a connection.
Also, when I try the full reset option (hold the button, release when red, when flashes once push throttle etc) it doesn't flash ready for me to move throttle.
I checked inside and opened the receiver box inside the car. Some very small amounts of water but only in the screw holes
Anything else I can try to 'sync' it back, if that's the issue? Its only a day old so pretty frustrated.
It stopped working just as he used it today, went about 10 ft then stopped and wouldn't sync after that.
Try disconnecting the servo and see if the light turns green
Throttle trim could be out of adjustment.
Whatever it is I just typed... could be wrong.