hi guys can someone help me out i have just purchased a new revo 3.3 tqi and the wife has got me a new spektrum dx3c for crimbo , can i bind these together without changing anything or do i need to buy parts please
Just take out the Traxxas receiver and install your new one. No extra parts needed. .
thank you will try to do it myself when i get my new radio thanks ,, john
its a no the revo has a reciever of 5 channel with 2 channel 1s as it has 2 steering servos , the dx3c has a 3 channel reciever with it , so i am not sure how to do this ?? or to set it all up
get a Y- Connector.. and use that going into your receiver steering channel slot and plug each one one of the servos into the Y... but you should seriously consider picking up a single steering servo.
you know.. i never had a sig.. but i do now...
Only channels you need is the channel 1 for steering , 2 for throttle, and 3 for reverse. You revo steering servos should already have the Y connector installed. The other channels on the Traxxas receiver are for the telemetry options. Like for the rpm's, speed, temp sensors.
A y cable is all you need to purchase, $3-6 at your local shop.
That is what I did with one of my Revos that had dual servos.
The telemetry items have their own ports and don't use the 1,1-5 ports.
Last edited by Zepher; 12-23-2012 at 10:18 AM.
ERBE, ERBE, Summit, Slash 4X4, Bandit,
thank you zepher that is the same system i have i will try that thank you
Ah OK my mistake. I thought he was including the telemetry ports as a channel, but the receiver that comes with the spectrum will drop right in. Like I said all you need is channel 1,2,and 3. And get the Y connector for the steering servos.