Hey guys, I'm trying to have my engine stay running. Whenever I start it, it stays on for about 5 seconds then just shuts off. I had to replace the carb because I tightened the HSN too much that the housing broke. I took a carb off my old nitro because they're the same carb. I did set the needles back to factory and I noticed that gas came out from the exhaust so I tightened it 1/4 of a turn then no gas was coming out then. The engine was flooded but that shouldn't be the reason why it keeps shutting off. Please help! I'm getting quite frustrated with fiddling with it:/
just replace the glowplug
All I need now is to set a new lap record.
Try a new glow plug.
Jato 3.3, Revo .28 JL Max, Nitro Stampede 3.3
I'll try that but my glow plug still glows:/
Even if it still glows it could still be bad.
"I like rc cars"....."WHAT? YOU'RE KIDDING!"
turn your idle screw in a few turns....turn the low needle in a turn...and turn the high needle in a turn....see if it stays running.