My new beadlocks rub the suspension arms at about 3/4 compression... how to fix? Do I modify the beadlocks, grind down the arms, what?
your rims are rubbing? maybe not the right rims for the truck. anyone else try these on there summit?? only reason i havent bought new rims n tires. oooo00o0o0 n money!!!
NO U CANT DRIVE MY SUMMIT!
Liquid RC had them listed on their site as a fit.... obviously an error
Sent from my SGH-I717 using Tapatalk 2
I have the same rims. You have to narrow them. Here's a link to my thread on narrowing the same wheels, just black.
Last edited by Tmaxxed; 03-19-2013 at 09:49 PM.
I also have the same rims and took a inch out of the center of the rim to make them work.
l_l O l_____l O l
Tip ( may not work on 17mm rims)
But on my 23 mm hex I placed a 23 mm hex nut on the hub, blue loctite it in place, put the wheel ON TOP of that hex nut and then secured the wheel with a second hex nut. It gave me approx 4mm of width. Just enough to avoid rubbing rims. Like I said it may not work on the star shaped traxxas hex nuts, but it may be a good fix for aftermarket hubs.
MAN, Use Common Sense.
Outside? THERE IS NO BOX !
Mine rubs but I just keep driving , it'll dig a small groove in the arm, not serious enough to cause damage or compromise structural integrity.
I put progressive 2 rockers on mine and they don't rub the arms anymore but they still rub the toe links at full lock.
ERBE, ERBE, Summit, Slash 4X4, Bandit,