Anybody know if my pede motor and esc will work in my daughters monster mutt? Cause I ordered a castle set up
Last edited by mikeorood; 11-04-2012 at 05:41 PM.
you will need 48p pinions i recomend traxxas brand ones mot sure about # of teeth probably 18-20 but im not sure
sl2sh, p4de trail truck
So it's about the same as a 2wd pede
Rusty - MERV - Pede 4x4-Alias
SPC Lipo Power
It will have 2 from the factory?
Ya can't polish fertilizer...
Or you could put a 32P pinion on if you have a 32P spur to mesh with. Its stronger than 48P, but you can't run the gear cover.
Sig edited for awesomeness. NC
So the motor shaft should be the same size
Esc mount is part # 3626. Pinion and spur you might wanna switch to 48p because then you can run a gear cover. I recommend the rpm gear cover for traxxas 2wd transmissions... Screws that hold the motor to the transmission case are different. Hope this helps!
Slash VXL, Rally VXL, and Stampede 4x4 VXL.