Back at the drawing board.
Iím designing a chassis for a custom Street SMaxx build.
Nothing extreme, but a different layout. Iím gonna try and make a recessed fuel tank up front so that it fits between the chassis braces. It will be extended front and rear with about a 16 inch wheel base.
Being 2 wd it will give me the room for the recessed tank and I may try to also make a center mounted steering servo if I can figure out the linkage and use a direct pull throttle.
Here is what Iíve got so far in the way of chassis design.
It should look similar to this when complete.
No slipper/tall gearing/power = broken parts.