Ok so i got a new single servo its a hitec 200oz i know thats not a bunch but it works for me. so when i turn the wheel on the transmitter to go right the servo turns left. How do i fix this?
Make sure its not plugged in backwards in the rx. If its correct, you can reverse the steering on the tx.
It wouldn't work at all if it where plugged in backwards in the Rx.
To reverse the servo direction.
These are the steps for LINK and TQi radios:
Hold MENU for 3 seconds
2 Green Blinks
8 Green Blinks
Whatever it is I just typed... could be wrong.
All Hitec servos need to be reversed. FWIW.
Alt-248 on the number pad = °
Maybe so, but I could have swore I've put the servo in backwards before and it reversed the direction. I think it was either a Hitec or Spektrum servo.Shoot, it may have been a Spektrum rx as well. Hah, I'll just blame it on age and say I imagined it.
can you just move it to the other side of the truck
No, the servos actually run on the same channel and rotate the same direction.
They push/pull because they are mirrored to each other if that makes sense.
Sent from my iPhone using autocorrect