Curious... I am trying to calculate the speed with the parts I ordered. The truck is stock with a 26T pinion and Imex claw dawgs. Using the speed calculator, I estimated them to be similar in diameter as the traxxas old maxx tires.
Last edited by Brokenparts; 10-21-2012 at 09:59 PM.
Overall Drive Ratio:
20.88 (stock, out-of-box)don't know if this was what your looking for but it's what the spec sheet shows
drive it like you own it,full throttle
20.88 turns of the motor for one turn of the wheel?
Looks like the roll out includes the spur/pinion combo and tire diameter. Im not sure how tire diameter changes roll out but it does O.o
Okay, I see. Roll out is the amount of turns the motor has to complete to move the tire one inch, so tire diameter would definitely affect that!
Entering the claw dawg diameter and not including tire growth, my truck is geared for ~32mph on a fresh lipo charge. I think that may be a little on the slow side for this motor. Should I order a bigger pinion?
38mph with 1/2" in tire growth
Last edited by Brokenparts; 10-22-2012 at 07:01 PM.
Diff ratio is 2.85:1
Look out for the tree/crunch!
LiPo? Naw NITRO!!