anyone help me out on where to plug in the black plug for the volt sensor on my revo 3.3. i have the red hooked to the temp like it says but no idea where the black connector goes.
The black goes into the volt/temp ch, the red goes into any open channel, going by memory. If that doesn't work, reverse the colors.
the black is a big plug with red and black wire, i have the red to red on temp sensor. the big black plug is the one i have no idea where it goes.
The grey goes to the top one marked yolt/temp, not the red. If you have the correct reciever, you should have an open channel. Plug the red into the open channel.